Ididit 1180280010 Tilt/Telescoping Floor Shift Steering Column, 28 In
Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube.
Measures 28" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 8-position tilt, and accepts a 9-bolt steering wheel.
- Steel tube diameter 2 inch OD
- 9 bolt wheel adaptor
- 8 position tilt
- Self canceling turn signals
- 4 way flasher
- Horn wiring
- Standard dress up kit
- IDIDIT 1” DD lower shaft
Note: The top head of the column has a built-in, locking 9 bolt steering wheel adaptor that when turned, moves your steering wheel either closer to you or further away. In a collapsed position the column will telescope 1 ½ “ towards the driver.
Conversion chart ( Wheel adaptor included in measurement)
28” Tilt column = 31 ¼ Tilt / Tele column
30” Tilt column = 33 ¼ Tilt / Tele column
32” Tilt column = 35 ¼ Tilt / Tele column
446-1230D Instructions (PDF)
- Column Dimensions (Link)
- Measures 7-5/8 from the end (steering wheel mount) to the end of the cone where the cone transitions into the 2 shaft.
More Like This
Ididit 1180300010 Tilt/Telescoping Floor Shift Steering Column, 30 In
Ididit 1180320010 Tilt/Telescoping Floor Shift Steering Column, 32 In
Ididit 1180160020 Tilt/Telescope Floor Shift Steering Column, 19.25 In
Standard GM 5-Position Tilt Steering Column, 32 Inch Long, Plain
Ididit 1120550020 1955-56 Chevy Tilt Steering Column, Chrome
Ididit 1120550010 1955-56 Chevy Tilt Steering Column, Plain
Standard GM 5-Position Tilt Steering Column, 30 Inch Long, Plain
Standard GM 5-Position Tilt Steering Column, 33 Inch Long, Plain
Standard GM 5-Position Tilt Steering Column, 30 Inch Long, Chrome
Standard GM 5-Position Tilt Steering Column, 30In, Column Shift, Plain
Q & A
If you're going to buy a horn isn't it nice to know what it sounds like first? That's why Speedway produced a helpful video to hear the differences in the unique horns that we offer.
Installing a universal tilt steering column in an old car is a common upgrade. Check out this tech article to learn how to mount your custom steering column correctly.
Tim talks about power & manual steering vega boxes.
Installing a horn button may seem daunting, but this 10 minute video will show you just how easy it really can be!
Nice graphic courtesy of Bills Hot Rod Company about which of thier Power Steering brackets will work with which water pumps, on both small block and big block Chevy engines.