IMCA Sport Mod Rear Suspension Standard 2-Link Rod End Kit

For some - you need the hardware and bits and pieces to build out your own custom designs. We listened to your feedback and are happy to offer this 4-Bar Rod End Kit for you custom suspension gurus out there dreaming up the next big thing in suspension design and technology!

This kit will replace every rod end on IMCA Sport Mod and similar 2-link suspension cars (2-link bars, pull bar, and panhard bar)

Kit Contains:

• (2) Standard Steel Heim Joint Rod Ends, 5/8"-18 LH Male
• (2) Standard Steel Heim Joint Rod Ends, 5/8"-18 RH Male
• (2) Steel Jam Nut, 5/8"-18 LH
• (2) Steel Jam Nut, 5/8"-18 RH
• (2) Standard Steel Heim Joint Rod Ends, 3/4"-16 LH Male
• (2) Standard Steel Heim Joint Rod Ends, 3/4"-16 RH Male
• (2) Thin Steel Jam Nuts, 3/4"-16 LH
• (2) Thin Steel Jam Nuts, 3/4"-16 RH

Standard Steel Heim Joint Rod Ends

These standard rod ends are a general-purpose, two-piece design. They have a carbon steel body and a hardened ball with metal to metal contact.

Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

Steel Jam Nuts

Plain steel fine thread jam nuts. 3/4"-16 nuts are special half-thickness nuts for securing steering heims to a panel or flange.