|
#54565226
Holley Carburetor Float Bowl Clear View Sight Plugs
- Check fuel level without removing the plug
- Not compatible with Ethanol fuels
- Thread is 5/16"-24 and the plug diameter is 0.50"
$12.49
/pair
In Stock
Quantity
Need Help? Call to Order
Add to a list
Product Summary
Universal Fit
- Check fuel level without removing the plug
- Not compatible with Ethanol fuels
- Thread is 5/16"-24 and the plug diameter is 0.50"
- Awesome addition to your Holley carburetor
- Kit contains (2) O-RINGS .070 X .239
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 54565226 Details
Speedway Motors 54565226 Details
Speedway Motors 54565226 Specifications
Speedway Motors 54565226 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 54565226 |
| Brand | Speedway Motors |
| Overall Length | .50" |
| GENERAL | |
| Sold in Quantity | Pair |
| Notes | (2) O-RINGS .070 X .239 , 200-010 ALTERNATE 5506057 |
Ratings & Reviews
3.3
25 Reviews
Customers appreciate the product's convenience, highlighting its easy installation and ability to check the carburetor's float level without spilling fuel. It significantly simplifies fuel level adjustments, eliminating the need to unscrew float level screws. However, several customers found the product's material quality lacking, saying it breaks under pressure; particular criticism was aimed at the product's poor fit with side hung bowls. A few also reported issues with an oversized O-ring diameter causing distortion and sealing issues. Despite this, the product's clear vision feature and neat appearance were positively noted.
Ratings & Reviews
3.3
25 Reviews
Customers appreciate the product's convenience, highlighting its easy installation and ability to check the carburetor's float level without spilling fuel. It significantly simplifies fuel level adjustments, eliminating the need to unscrew float level screws. However, several customers found the product's material quality lacking, saying it breaks under pressure; particular criticism was aimed at the product's poor fit with side hung bowls. A few also reported issues with an oversized O-ring diameter causing distortion and sealing issues. Despite this, the product's clear vision feature and neat appearance were positively noted.
3.3
25 reviews
5
11
4
3
3
1
2
2
1
8
Most Liked Positive Review
5.0
A Must Have Product
Setting the float level on a holley carb is not easy and with these site plugs it easy to see the fuel level without having fuel leaking onto your engine. I can't see any racer not having these in his or her tool box.
Most Liked Negative Review
1.0
No Due to the part dissolving before I could get floats set
I bought two sets of these clear view sight plugs put them into two holley carburators before i could get the float set the large part of the sight plug had fallen onto intake leaving partial threads and plug in carb bowls which caused me to have to remove all four bowls get partial threads out and debris out of carb. Had to use spare bowl gaskets that was ordered for later use on same order from speedway at that time.
Filter by Ratings
yes
4.0
2 years ago
baconator
milford,ne
Verified
you just screw it into the hole where the old brass plug was.
Would Not Recommend
I might buy this agian
4.0
3 years ago
Willliam
Waco texas
These did not fit the holly side hung bowls. Due to some casting. That wouldn't allow the plug to sit flat. Maybe if the head wasn't so big they might have worked. The Holley brand sight plugs don't have as big as a head on them. My carbs are 9776 side hung bowls.
They break under pressure
1.0
3 years ago
Robert
Texas
Verified
Don't over tighten them into the float bowls and make sure your fuel pressure isn't too high. I had mine at 5.5 PSI and they still broke.
Would Not Recommend
Clear holly carburetor bowl screw
3.0
3 years ago
Cj
Carriere, MS.
Verified
Purchased 3 clear carburetor plugs/screws and one broke within 3 days
Would Not Recommend
Good product fast shipping
5.0
3 years ago
Paul
Lodgepole Nebraska
Verified
Nice to be able to check the float level on the holly carburetor without spilling fuel
Would Recommend
yes
5.0
4 years ago
Doug
Brainerd, mn
Verified
can now see what flood levels are set at.
Would Recommend
No
2.0
5 years ago
Whack
Oklahoma
Used while doing test and tune at the track. Broke easily. Couldn't complete setup at the track. Had to take it back to the shop, remove the bowl and take it out from there. Went back to original style.
Would Not Recommend
Nice product, fast delivery
5.0
6 years ago
Tom
Atlantic Mine Mi
Verified
fit great easy install
Would Recommend
yep just what i wanted
5.0
6 years ago
Willie B Me
Texas
Verified
perfect fit
Would Recommend
yes
5.0
7 years ago
jb
wa.
Verified
ez float adj.j
Would Recommend
Showing 10 of 25 reviews