-7%

Holley 12-362 98-02 GM F Body Sngle 340Lph Pump Mod

-7%

#42512362

Holley 12-362 98-02 GM F Body Sngle 340Lph Pump Mod

Anodized and laser-etched billet 6061-T6 flange with 6AN ORB ports for feed, return, and vent
Fits factory plastic tank used in LS1 98-02 Camaro / Firebird or an earlier 4th Gen F-body with fuel tank upgrade
Comes pre-installed with new pre-calibrated fuel level and tank pressure sensors

$549.95

/each

Factory Shipped

$595.95

Save $46.00

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

98-02 Chevy Camaro, 98-02 Pontiac Firebird

Anodized and laser-etched billet 6061-T6 flange with 6AN ORB ports for feed, return, and vent
Fits factory plastic tank used in LS1 98-02 Camaro / Firebird or an earlier 4th Gen F-body with fuel tank upgrade
Comes pre-installed with new pre-calibrated fuel level and tank pressure sensors
Fittings included allowing connection to the factory 3/8 quick connect feed and return lines
Kit includes vehicle pigtail harness - All connectors used are DTM style

See more details

Key Specs

MFG. Part #	12-362
Electric Fuel Pump Type	In Tank
Free Flow Rate	108 GPH /410 LPH
Voltage	12 volts
Fuel Pressure	90 psi

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Holley 12-362 Details

If you are looking to make some serious power with your 1998-2002 4th Gen F-body, the Holley modules feature billet pump flanges that connect to either single or dual 340 or 450 LPH pumps. All four of these options are compatible with gasoline and E85 and come pre-installed with new level and tank pressure sensors as well as provisions to connect to the factory EVAP system for EPA compliance.

Each module also comes with all the parts and pieces necessary to complete the installation. Included is a 3 x 11-inch Hydramat filter that leverages surface tension to draw from nearly any area that has contact with fuel eliminating starvation under hard acceleration or cornering. Also included is a new fuel pump gasket, wiring pigtails for the level sender and fuel pump, and fittings to connect to the factory quick connect feed and return lines. The modules are all return style, so don't forget to pick up an EFI pressure regulator (such as the 19-392 or 19-395) to complete your installation.
Anodized and laser-etched billet 6061-T6 flange with 6AN ORB ports for feed, return, and vent
All SKUs compatible with Gasoline AND E85
Comes pre-installed with new pre-calibrated fuel level and tank pressure sensors
Includes new gasket to complete installation
3 x 11-inch HydraMat is included for each pump
Fits factory plastic tank used in LS1 98-02 Camaro / Firebird or an earlier 4th Gen F-body with fuel tank upgrade
Fittings included allowing connection to the factory 3/8 quick connect feed and return lines
Flanges have been designed to be compatible with feed and return line sizes up to -8AN
Step-down butt connectors included to wire level sensor
Can be connected to factory EVAP system (w/ use of 12-874 and 935056ERL - sold separately)
Kit includes vehicle pigtail harness - All connectors used are DTM style
Drive the vehicle until the level in the tank is at or below 1/8 of a tank. To make tank removal and reinstall as easy as possible, the lower the fuel level the better.

CA Prop 65

Holley 12-362 Specifications

KEY SPECS
MFG. Part #	12-362
Brand	Holley
Electric Fuel Pump Type	In Tank
Free Flow Rate	108 GPH /410 LPH
Voltage	12 volts
Fuel Pressure	90 psi

GENERAL
Sold in Quantity	Each
GTIN Code	00090127142042

Ratings & Reviews

Be the first to write a review.

Questions & Answers

Be the first to ask a question.

Fitment

1998-2002 Chevy Camaro

1998-2002 Pontiac Firebird