|
#91004521
$149.00
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 6.50" Overall Length, 1.87" Tube I.D.
Need help?
855.313.9176Quick and Easy Returns
Return PolicyNow you can make that old gas tank filler neck and cap go away with this easy flush mount gas door kit. Just select the style that would best fit to the surface and choose the design of the gas door with the hinge mount on the left or right side. This has a fuel spout that is 2" OD to accept a 2" ID fuel hose of your choice. Fuel hose not included. Can be mounted in steel or fiberglass.
| KEY SPECS | |
|---|---|
| MFG. Part # | 45 RFP |
| Brand | Hagan Street Rods |
| GENERAL | |
| Overall Length | 6.50" |
| Overall Height | 5.25" |
| Overall Thickness | 2.625" |
| Tube I.D. | 1.87" |
| Tube O.D. | 2.00" |
| Tube Length | 3.00" |
| Material Thickness | .05" |
| Material Type | Steel |
| Finish | Natural |
| Sold in Quantity | Each |
4.7
7 Reviews
Customers speak highly of our product's excellent quality and aesthetic. Its design is often described as well-made and good-looking, making it appear like original equipment on vintage vehicles. The product's installation is noted for being straightforward and manageable even for those with novice skills. It has demonstrated long-lasting performance with one review mentioning a 7-year service life without problems. Some customers have expressed that the hinge could benefit from being made of heavier metal for improved support. Our product has been favorably used in vehicles like the '57 Studebaker, '66 Mustang, and '68 C10, setting it apart in the market.
4.7
7 reviews
5
6
4
0
3
1
2
0
1
0
Filter by Ratings
I would buy it again
5.0
3 years ago
Studebaker
Chico, Ca
Verified
Easy install on the inside of my bed on my 57 studebaker .
Would Recommend
Yes
3.0
6 years ago
Darrel
Ceresco, NE
Verified
Using on a 1966 Mustang. The hinge on the gas door is of weak metal, need to be heavier metal. Had to make a gusset for support.
Would Recommend
Yes
5.0
6 years ago
Leo
Lindrith, NM
Verified
Works fine
Would Recommend
Nice piece
5.0
7 years ago
Jason
deerfield wi
Verified
well made looks awesome!
Would Recommend
good prouduct,service and price as always. thanks
5.0
11 years ago
tw
lake havasu city az
Verified
used this gas fill door on two cars great and easy install. one on a truck used now for 7 years still good.
Would Recommend
Excellent quality product
5.0
12 years ago
K8O1
Dacula, GA USA
Verified
This is a high quality piece. Installed easy and looks great!!
Would Recommend
Great Design
5.0
14 years ago
jphillips52
Loganville, GA
Verified
I used this in relocating the tank on my 1968 C10 from inside the cab to the rear of the truck. After looking on the web for possible fuel filler location I decided to go with a more conventional location and purchased this filler door. I have installed the door and put the base and clear coat on the truck bed this weekend. The fuel door looks like it is original equipment. I would list my skill levels for body work a little above novice, so if I can do this almost anyone should be able to.
Would Recommend
Showing 7 of 7 reviews
1 Question • 1 Answer
Hello, I inquired earlier about the cap that comes with this item. I was told it is "vented" and therefore would not require a separate vent. However, I've determined the best (and only way) for me to mount the filler neck is to do so with the filler neck and cap "in" the trunk of my hot rod. Is it possible to get a similar spring loaded cap (that doesn't have to be removed to insert the nozzle) but which is "not vented"? I intend to run a separate vent line to the exterior atmosphere so as not to accumulate gas fumes within the trunk of the car. If so, I'd like to order this product with that sealed cap. Thank you! Blake
by Blake
• 7 years ago
1 answer
View Answer
1 of 1 questions shown
