TYPE II Power Steering Hose Kit, AN6, Black Anodized

We've put together this kit for the Type II Power Steering Pump, to help you quickly get your system plumbed and on the way. Featuring Fragola PTFE lined hose for the pressure side, Fragola braided rubber hose for the return and all the AN6 fitting to connect it all together.

The properties of PTFE make it a natural for all highly corrosive applications like automotive brake fluid.  PTFE also works well for hot oil and power steering fluid.  These hoses will take high pressure and cycle over and over without failure.

• Working pressure:  1,500 psi.
• Burst pressure:  6,000 psi.
• Minimum bend radius:  6.5" 
• Fitting feature a black anodized finish
• AN6 full flow fitting design

Kit Includes

• (1) Fragola 689006-BL Real-Street 90 Degree PTFE Hose End Fitting, -6 AN
• (1) Fragola 684506-BL Real-Street 45 Degree PTFE Hose End Fitting, -6 AN
• (1) Fragola 603006 Series 6000 PTFE Lined Hose, -6 AN, 3 ft. Roll
• (1) Fragola Premium Black Nylon Braided Rubber Hose, -6 AN, 3 Ft
• (1) Full Flow Swivel Hose End Fitting, 45 Degree, Anodized, -6 AN
• (1) Full Flow Swivel Hose End Fitting, 90 Degree, Anodized, -6 AN

Fragola 689006-BL Real-Street 90 Degree PTFE Hose End Fitting, -6 AN

Fragola’s new line of Real Street black anodized aluminum, reusable, hose ends for Series 6000 P.T.F.E. hose. Together they eliminate fuel permeation issues common with aftermarket racing hose. A unique “double-swivel” design allows for clocking adjustment after installation. These reusable hose ends feature a miniature “olive” that retains the hose inside of the fitting. By replacing this “olive” the hose end may be reused over and over.

• 90° hose end
• -6 AN
• Black anodized finish
• Double-swivel design
• Reusable
• For P.T.F.E. hose

Fragola 684506-BL Real-Street 45 Degree PTFE Hose End Fitting, -6 AN

Fragola’s Real Street black anodized aluminum, reusable, hose ends for Series 6000 P.T.F.E. hose. Together they eliminate fuel permeation issues common with aftermarket racing hose. A unique “double-swivel” design allows for clocking adjustment after installation. These reusable hose ends feature a miniature “olive” that retains the hose inside of the fitting. By replacing this “olive” the hose end may be reused over and over.

• 45° hose end
• -6 AN
• Aluminum
• Black anodized finish
• Double-swivel design
• Reusable
• For P.T.F.E. hose

Fragola 603006 Series 6000 PTFE Lined Hose, -6 AN, 3 ft. Roll

The properties of P.T.F.E. make it a natural for all highly corrosive applications like automotive brake fluid. P.T.F.E. also works well for hot oil and power steering fluid. The hose will take high pressure and cycle over and over without failure. This hose also handles nitrous oxide with ease.

P.T.F.E. powder is extruded into a smooth bore tube product.  The tube is then fed into a machine that weaves stainless wire into the familiar braided pattern.  The hose is inspected 100% and any flawed sections are discarded.

• -6 AN
• P.T.F.E. lined
• .500" nominal inside diameter
• Working pressure:  1,500 psi.
• Burst pressure:  6,000 psi.
• Minimum bend radius:  6.5" 
• 3' roll of hose

Fragola Premium Black Nylon Braided Rubber Hose, -6 AN, 3 FT

This lightweight motorsports-inspired hose has a rubber core and a flexible nylon cover. It's resistant to oil, fuels and coolants. Features a 500 PSI working pressure and an operating range of -40 F to +300 F. Designed to be used with both crimp style and full flow fittings.

• Rubber core
• Nylon outer braid
• -6 AN hose size

Recommended for motorsports applications, Fragola Performance Systems premium black nylon race hose is designed with a black synthetic rubber core to make it resistant to oil, fuels, coolants, and alcohol. This premium race hose is reinforced with a single braid of bright, corrosion-resistant type 302 stainless steel wire braid, and the black braided nylon cover makes this lightweight hose both durable and attractive. Its 500 psi working pressure is more than sufficient for most oil, water, and fuel systems.

 Full Flow Swivel Hose End Fitting, 45 Degree, Anodized, -6 AN

This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

They are manufactured from the highest quality aluminum and are then black anodized to give them a new sleek look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

• -6 AN female to push-on adapter
• 45 degree angle fuel line hose connector
• Lightweight aluminum hose ends are completely reusable, and interchangeable
• 37° angled sealing surface guarantees a positive anti-leak seal
• Available in a Black corrosion resistant finish

Full Flow Swivel Hose End Fitting, 90 Degree, Anodized, -6 AN

This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

They are manufactured from the highest quality aluminum and are then black anodized to give them a new sleek look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 90 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

• -6 AN female to push-on style adapter
• 90 degree angle
• Lightweight aluminum hose ends are completely reusable, and interchangeable
• 37° angled sealing surface guarantees a positive anti-leak seal
• Accepts a variety of lightweight aluminum AN style adapters & fittings
• Works great with custom fuel lines
• Available in a Black corrosion resistant finish

Fitting Thread Chart