|
#458890
$121.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 8" Overall Length
| MFG. Part # | 458890 |
| Brand | Speedway Motors |
| Overall Length | 8" |
| Ohm Range | 0 ohms empty, 90 ohms full |
| Height Adjustable | No |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThese bolt-in fuel level sending units from JAZ Products feature a positive seal and a 2.3" I.D. bung. For GM gauges with 0-90 ohm range.
Learn more about selecting the proper fuel sending unit by reading our tech article,Fuel Sending Units.
0 ohms Empty, 90 ohms Full
Application
8" tall unit for a tank depth of a minimum of 8-1/2"
Charts
Installation Guide (PDF)
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 458890 |
| Brand | Speedway Motors |
| Overall Length | 8" |
| Ohm Range | 0 ohms empty, 90 ohms full |
| Height Adjustable | No |
| GENERAL | |
| Bolt Hole Pattern | SAE 5 hole (2.125 in. bolt circle) |
| Sold in Quantity | Each |
| Notes | This will work with E-10 fuel. |
4.9
17 Reviews
Customers have overwhelmingly recommended our product, describing it as excellent, accurate, and reliable when compared to competitors. They noted its suitability for use in varied vehicles such as a '66 Nova, a '53 Chevy Pickup, and a '46 Chevy Pickup. An advantage of our product is its precise fuel reading, an upgrade from inaccurate swing-arm types. However, a minor issue some users encountered involved inadequate screw lengths for certain types of fuel cells. Despite this, many customers expressed willingness to repurchase our product for future projects, indicating high satisfaction levels.
4.9
17 reviews
5
15
4
2
3
0
2
0
1
0
Filter by Ratings
great item
5.0
2 months ago
ggg510
az
Verified
super cool way to add fuel level sending unit
Would Recommend
Good product
5.0
10 months ago
Rook
North Dakota
Verified
The fuel sender was
Would Recommend
Sending unit works great, would highly recommend it
5.0
a year ago
John
Mobile, AL
Verified
Easy installation, simple check to see if it was working, plus great instructions
Would Recommend
Yes
5.0
a year ago
Ton
Baltic S D
Have it installed Works great. Thanks for the good service
Would Recommend
Worked great in my RCI FUEL CELL
5.0
a year ago
Tommy 210
Branchburg nj
Verified
Replaced the original arm float type which never worked right. This one good so far!
Would Recommend
Good
5.0
a year ago
49
Wisconsin
Verified
Nice
Would Recommend
Hopefully it works so I do not have to.
4.0
2 years ago
scuba
Shawano Wi.
Verified
I am waiting for my new motor and going to rewire the truck. Will not know anything till all is done.
Would Recommend
Fuel sending unit for 66 nova
5.0
5 years ago
Nova
Arizona
Verified
Worked great
Would Recommend
Check your screw lengths.
4.0
6 years ago
Armored Transport
Home Improvement
Seems like a great unit, mine came without the contact pole topnuts, not a big deal. I am using this on a standard HDPE fuel cell and just a heads up; the mounting screws aren't long enough to hold everything. Just another fitment delay since I don't stock M5's. It's a marathon.
Would Recommend
i would but this again
5.0
7 years ago
jay
Paragould,Ar
Verified
works great
Would Recommend
Showing 10 of 17 reviews
8 Questions • 8 Answers
I have a universal fuel tank with the 5 screws and two screws are offset slightly in there length apart to accommodate the float type units for a left or right unit. Are the machine screws offset the same so the unit will fit on the universal tank properly. Doesn't say in the specs. Thank you. Bob T
by Bob
• 10 years ago
1 answer
View Answer
what fuel gauge goes with this product
by Laurence
• 11 years ago
1 answer
View Answer
do i need to remove the black plastic cap from bottom before install?
by ROD
• 11 years ago
1 answer
View Answer
what s the dia. of tube
by KeninSC
• 11 years ago
1 answer
View Answer
what post on the sender is positive
by huey
• 12 years ago
1 answer
View Answer
Will this sending unit work with the fuel safe ed112 cell?
by LazorJ
• 12 years ago
1 answer
View Answer
Is the 8.5" the total length or the depth it reaches inside the tank?
by Ratbert
• 13 years ago
1 answer
View Answer
i have a set of dolphin guages in my roadster and i was wondering which sending unit would work with the fuel guage. also do i measure from top to bottom for the length of the unit or do i leave a little space from the bottom. thank you.
by the breeze 68
• 15 years ago
1 answer
View Answer
8 of 8 questions shown
