|
#80292440
$95.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
C4, 1310 Yoke U-Joint Series, 28 Spline Count
| MFG. Part # | 80292440 |
| Yoke U-Joint Series | 1310 |
| Spline Count | 28 |
| Overall Length | 7.50" |
| Shaft Diameter | 1.5" |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThis Ford C-4 driveshaft slip yoke measures 6.5" from the center of the U-joint cup to the front end of the yoke. Fits transmissions with 28 spline tailshafts. Accepts 1310 style U-joints (popular Chevy) with 1-1/16" cups and a spread of 3-7/32".
Note: Due to the length of the yoke, it will fit C4 transmissions ONLY, and is not recommended for use on an AOD transmission. The expressed measurement or length of the slip yoke is taken from the center of the u-joint to tip, not overall.
Application
Ford apps:
( C4 ) - 28-spline, Fits Ford C-4 , AOD, Ford T5, T-10
| KEY SPECS | |
|---|---|
| MFG. Part # | 80292440 |
| Brand | Speedway Motors |
| Yoke U-Joint Series | 1310 |
| Spline Count | 28 |
| Overall Length | 7.50" |
| Shaft Diameter | 1.5" |
| Material Type | Steel |
| Finish | Natural |
| GENERAL | |
| Shaft Length | 5.00" |
| Sold in Quantity | Each |
4
17 Reviews
Customers appreciate the product for its quality and perfect fit for various models such as C-4, Ford cruise-o-matic, and T-5 Mustang transmission. It's considered a reliable replacement part with strong, hefty steel built to handle substantial torque. However, some customers reported defects and poor machining. It is a product of choice for project builds.
4
17 reviews
5
11
4
1
3
2
2
0
1
3
Most Liked Positive Review
5.0
Higher quality than I thought it would be very impressed
This should be able to handle the torque it will be receiving was a much heavier steel I plan to buy another for the next couple of builds I have planned
Most Liked Negative Review
1.0
Poor machine work
Took this yoke to a driveline shop to make my drive shaft but the 1310 u-joints did not work because the spread was too wide. When u-joints were installed each cap was 1/16" below the clips, so we could not use this yoke. Also, something is wrong with the spline as this splines had to be forced into the transmission. Will contact speedway for credit.
Filter by Ratings
Ford C4 tranny slip yoke
3.0
3 months ago
A guy
Florida
Verified
Application is obvious. Not happy with the fact that it leaks where the shaft is press fitted into yoke ( 2 pieces ). 40 years as Professional auto Tech, never seen that before. After reading some comments on a Ford forum, I used silicone sealer in an effort to stop leakage. Haven't been able to verify repair yet.
Would definitely buya again on my next project.
5.0
6 months ago
Hippy
Utah
Verified
Fits the ford c4 perfectly
Longer yoke
5.0
7 months ago
Munzie
Kingston Wa
Verified
My current yoke was about 1 1/2" to short. It was in only 1" at full extended suspension. Which it made it really lose.
Would Recommend
a good quality replacement
5.0
4 years ago
Jim K
Salina Ks
Verified
This yoke worked perfect when i needed to make a replacement drive shaft when i installed a C-4 in my 1957 T Bird with a 312 Y block motor.
Would Recommend
Very good quality
5.0
5 years ago
Joe
Wisconsin
Verified
Fit the transmission perfectly , nice fit on splines
Would Recommend
THE PART FIT
5.0
7 years ago
ALVIN
PALM BAY, FLORIDA 32905
Verified
THE PART FIT AS SUGGESTED BY SELLER, NO ISSUES.
Would Recommend
Fits great
5.0
7 years ago
Smoothapple
Grafton ohio
Verified
Ford cruise o matic
Higher quality than I thought it would be very impressed
5.0
7 years ago
Dano 48 f-1
Kemp tx
Verified
This should be able to handle the torque it will be receiving was a much heavier steel I plan to buy another for the next couple of builds I have planned
Nice fit
4.0
8 years ago
RRR
Saginaw MI
Verified
Fit great in my c4
Would Recommend
worked great would buy another if i needed it
5.0
8 years ago
Miff
little rock arkansas
Verified
used it on my 23 t bucket build and it worked perfect
Would Recommend
Showing 10 of 17 reviews
5 Questions • 5 Answers
Will this fit a 68 c4 transmission and if so what length drive shaft will I need to go with it. I have 8 inch year end on 67 mustang
by ace
• 11 years ago
1 answer
View Answer
does this yoke fit a ford T-5
by black30
• 12 years ago
1 answer
View Answer
will it fit 1980 c4 tranny does it have a flat spot in it
by oggie
• 12 years ago
1 answer
View Answer
Dose this drive shaft yoke fit London taxi tx2?
by Aliamrani
• 12 years ago
1 answer
View Answer
Do the splines come out to the front end of the yoke?
by Jay
• 15 years ago
1 answer
View Answer
5 of 5 questions shown
1966-1977 Ford Bronco
1975 Ford Courier
1965-1972 Ford Custom
1973-1977 Ford Custom 500
1968-1977 Ford E-100 Econoline
1975-1977 Ford E-100 Econoline Club Wagon
1976-1977 Ford E-150 Econoline
1976-1977 Ford E-150 Econoline Club Wagon
1975-1976 Ford Elite
1964-1980 Ford F-100
1977-1978 Ford F-150
1964-1977 Ford F-250
1964-1977 Ford F-350
1965-1969 Ford Fairlane
1978-1981 Ford Fairmont
1964-1970 Ford Falcon
1964-1974 Ford Galaxie 500
1975-1976 Ford Gran Torino
1975-1981 Ford Granada
1966-1979 Ford LTD
1977-1979 Ford LTD II
1970-1977 Ford Maverick
1964-1981 Ford Mustang
1974-1978 Ford Mustang II
1971-1980 Ford Pinto
1964-1979 Ford Ranchero
1977-1979 Ford Thunderbird
1968-1976 Ford Torino
1977-1980 Lincoln Versailles
1975-1980 Mercury Bobcat
1972-1981 Mercury Capri
1964-1977 Mercury Comet
1967-1979 Mercury Cougar
1964-1971 Mercury Cyclone
1971-1974 Mercury Marquis
1975-1980 Mercury Monarch
1968 Mercury Montclair
1968-1976 Mercury Montego
1972-1974 Mercury Monterey
1978-1981 Mercury Zephyr
