Falcon Transmission Kit for 2 Piece Rear Main Seal

Speedway Wissota Chevy/Ford Steel Bellhousing

These steel bellhousings are WISSOTA approved for Midwest Modifieds and work with both small block Chevy and small block Ford engine bolt patterns.  They allow for use with Muncie/Saginaw style transmissions.

• SBC and SBF engine bolt patterns
• Laser-Cut, CNC-finished flange for perfect fit
• Adapts either engine to Muncie/Saginaw pattern transmissions including BERT, Brinn, Falcon, etc.
• Bottom opening for easy access
• Does NOT have provision for stock style clutch arm
• WISSOTA approved for Midwest Modifieds
• Non SFI rated
• NOT for street use
• Must be used with a 153 tooth (Chevy) or 157 tooth (Ford) or smaller flexplate/flywheel

Falcon Racing Transmission

For one low cost, you can have an aluminum transmission with an internal hydraulic clutch, engine coupler, reverse, and two forward speeds, (2.4 to 1 first, 1 to 1 high).

• Lightweight gears.
• Simply bolt to your scatter shield, hook up your hydraulic clutch pedal and go!
• 21-5/8" long at 43 pounds. Use 153 tooth flexplates.

Transmission Stand

For storage or transporting, this 2-piece tranny stand design makes it easy. Fits Saginaw and others with short tail housing.

Braided Stainless AN 4, 60 Inch Brake Line

Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines.

• These have straight AN4 fittings on both ends.
• Zinc plated steel ends

B&M Trick Shift ATF Automatic Transmission Fluid

Trick Shift ATF was originally developed by B&M for racing applications. It’s become so successful that it’s the most popular high performance fluid on the street also. A scientific blend of foam inhibitors, pressure agents and shift modifiers that will provide extended transmission life and drastically improved shift feel. Trick Shift is the easiest way to measurably improve the transmission performance of your vehicle.

Trick Shift works with all automatic transmissions when a firmer shift is desired (not recommended for electronic controlled transmissions). It can be mixed with stock-type transmission fluids, however to attain maximum improvement you should use Trick Shift exclusively. Ideal for towing, light trucks and RV applications as well as racing.

Speedway Bellhousing Bolt Kit

The Speedway Bellhousing Bolt Kit has all necessary hardware to install our steel bellhousing (91027001) to back of your motor.

Includes:

• 6-3/8"-16 x 1-1/4" Grade 5 bolts
• 6-3/8" Grade 5 flat washers
• 6-3/8" Grade 5 lock washers

Material Safety Data Sheet (PDF)