Falcon Racing Transmission for 1 Piece Rear Main with Free Stand

#8026020

Falcon Racing Transmission for 1 Piece Rear Main with Free Stand

Name: Falcon Racing Transmission for 1 Piece Rear Main with Free Stand
Brand: Falcon Transmission
SKU: 8026020
Price: 1898.99 USD
Availability: InStock
Rating: 5 (1 reviews)

1 Review

1 Question

Features two forward speeds (2.4:1 Low Gear, direct-drive 1:1 High Gear with minimal rotating mass), neutral, and reverse
Comparable dimensionally to Muncie, T-10, and other similar transmissions - and that includes the 1-3/16” x 27-spline output shaft, which by design contributes to the most positive high gear retention in the industry

$1,898.99

/kit

In Stock

$1,927.34

Save $28.35

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Falcon, 2-Speed Transmission Speeds

Features two forward speeds (2.4:1 Low Gear, direct-drive 1:1 High Gear with minimal rotating mass), neutral, and reverse
Comparable dimensionally to Muncie, T-10, and other similar transmissions - and that includes the 1-3/16” x 27-spline output shaft, which by design contributes to the most positive high gear retention in the industry
Frictionless bearings support all rotating components for unmatched durability, and as with all Winters transmissions, all rotating internals, from gears to shafts, are REM-finished
Includes Chevy Late Small Block (1986-Up 1-Piece Rear Main) 18 Spline Crank Coupler (Winters 8251-62350-18)
With its aluminum case and extension housing, the transmission weighs just 45 pounds

Comes as a Kit

View Kit Components

See more details

Key Specs

MFG. Part #	8026020
Brand	Falcon Transmission
Transmission Speeds	2-Speed
Input Shaft Spline Count	18
Input Shaft Diameter	1.0625"

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Falcon Transmission 8026020 Details

Falcon Racing Transmission with Free Stand

The Falcon Late Model transmission has two forward speeds, neutral, and reverse, with an integral hydraulically-applied clutch operating low and reverse gears. High gear is a direct-drive 1-to-1 ratio with minimal rotating mass. With its aluminum case and extension housing, the transmission weighs just 45 pounds.

It’s comparable dimensionally to a Muncie, T-10, and other similar transmissions—and that includes the 1-3/16” x 27-spline output shaft, which by design contributes to the most positive high gear retention in the industry. It comes with the correct crank coupler for easy installation—even to a stock flywheel housing. Frictionless bearings support all rotating components for unmatched durability, and as with all Winters transmissions, all rotating internals, from gears to shafts, are REM-finished.

IMCA Approved for Stock Car, Modified, and Late Model classes
Includes Chevy Late Small Block (1986-Up 1-Piece Rear Main) 18 Spline Crank Coupler (Winters 8251-62350-18)
Internal wet clutch saves the cost and rotating mass of a "stock" type clutch, no torque converter or pressure plate required.
- Hydraulic clutch pedal required
All rotating internals, from gears to shafts, are REM-finished
Strong enough to hold up through the low-900 HP range
Extension Housing includes a sturdy roller bearing to accommodate 1-1/2 inch diameter slip yokes
9 inch yoke permits 7-1/2" of yoke travel while maintaining a minimum of 1-1/2" of spline engagement
Measure 21-5/8" from bellhousing flange to end of tail housing
1-3/16 x 27 spline output shaft
Two forward speeds

Falcon Transmission 8026020 Specifications

KEY SPECS
MFG. Part #	8026020
Brand	Falcon Transmission
Transmission Speeds	2-Speed
Input Shaft Spline Count	18
Input Shaft Diameter	1.0625"

GENERAL
Torque	600 ft./lbs.
Output Shaft Spline Diameter	1.1875"
Output Shaft Spline Count	27
Case Material	Aluminum
Bellhousing Included	No
Yoke Included	No
Shifter Included	No
Gear Ratio (Low)	2.40:1
Gear Ratio (High)	1.00:1
Notes	1.62"-18 spline input shaft. 1-3/16"-27 spline output shaft
Sold in Quantity	Kit
Tailshaft Length	14.525"
Yoke Style	Slip On
Shifter Style	Linkage operated

Ratings & Reviews

1 Review

Write A Review

1 reviews

Filter by Ratings

Sort Reviews

Very pleased this transmission it's exactly as advertised

5.0

5 years ago

Hitman Hillard

Kodak TN

Verified

Used in 602 crate late. No complaints. Speedway Motors made ordering easy and had it in 3 days. I recommend this transmission.

Would Recommend

Showing 1 of 1 reviews

Questions & Answers

1 Question • 1 Answer

Sort Questions

How much does it weigh

by Brance

• 5 months ago

1 answer

View Answer

1 of 1 questions shown