Engine Assembly Lube and Thread Torque Sealant Kit

The Edelbrock Gasgacinch gasket sealer assures proper sealing of all gaskets used during a manifold installation. It is also effective on water pump, oil pan and valve cover gaskets.

• Assures Proper Gasket Seal
• Used In Manifold Installation
• Effective On Water Pump
• Effective On Oil Pan
• Effective On Valve Cover Gaskets
• Easy Gasket Removal

Specifically designed to reduce tension preload scatter and eliminate the need to cycle high performance engine fasteners before final installation.

NOTE: This item cannot ship air, it is ground shipping only.

Learn why using assembly lube is so important in our tech article Installing New Hardware.

 

When using on threads for a temperature sensor or sending unit, be sure to use a minimal amount that does not coat the entirety of the threads from the top to bottom of the threads as some applications will require the sensor or sending unit to ground through the threads. A minimal amount of sealant at the beginning of the threads should adequatly seal but yet retain the necessary ground when required.

 

Lucas High Performance Assembly Lube is designed for mechanics and technicians to pre lube bearings, cams, lifters and valve train. The Semi-Synthetic formula contains ZINC, MOLY and other high pressure additives which offer maximum protection during engine break-in. Super slick and easy to use, Lucas High Performance Assembly Lube will eliminate dry starts and prevent seizing galling and scuffing.

• Eliminates Dry Starts
• Perfect For Engine Building
• Use To Pre Lube Bearings, Cams, Lifters and Valve Train
• Prevents Seizing Galling and Scuffing
• Compatible With All Oils
• Super Slick and Tacky
• Prevents Breakdown During Long Term Storage
• Contains ZINC, MOLY and Other High Pressure Additives
• Easy To Use

 

COMP Cams Cam and Lifter Installation Lube, 4 oz. Bottle.

Initial start-up is the most critical time in the life of any Camshaft. COMP Cams Cam and Lifter Installation Lube is the best protective break-in lubricant on the market. Cam and Lifter Installation Lube must be spread generously on all lobes of the cam, on the bottoms of the lifters and on the distributor gear when installing a cam. Cam and Lifter Installation Lube from COMP Cams provides the instant protection you need to guard against any premature wear.

 

This silicone gasket maker and sealant is perfect for use on freshly rebuilt engines and components to provide a strong and long-lasting seal. Edelbrock silicone sealant comes in a grey 3 oz. tube.

• RTV gasket maker sealant
• Great for Engine Assembly and Gasket Repair
• 3 oz. grey tube

This silicone gasket maker and sealant is perfect for use on freshly rebuilt engines and components to provide a strong and long-lasting seal. Great for use on intake manifold installation, Edelbrock high-temperature silicone sealant is low-ordor and works to retain high flexiblitity to prevent leaks and seepage caused by vibration and thermal expansion. RTV silicone is oil-resistant, fast-curing, sensor-safe, and non-corrosive.

• RTV black silicone sealant
• Great for Engine Assembly and Gasket Repair
• High-temp, oil-resistant, fast-curing, sensor-safe, non-corrosive
• 0.5 oz. black

• Highly refined blend of aluminum, copper and graphite lubricants
• Salt, corrosion and moisture resistant, this lubricant is ideal for marine use
• Prevents galling, corrosion and seizing and to assure easier disassembly
• Suggested Applications: For easy removal of spark plugs, cylinder head and exhaust head bolts
• Temperature range: -60F to 1600F