|
#91050149-BLK
$196.99
/each
In Stock
Garage Sale alternatives: from $161.99
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 8.50" Overall Width, 7.50" Depth, Steel
Need help?
855.313.9176Quick and Easy Returns
Return Policy
Charts
Instructions (PDF)
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91050149-BLK |
| Brand | Speedway Motors |
| GENERAL | |
| Overall Width | 8.50" |
| Depth | 7.50" |
| Sold in Quantity | Each |
| Finish | Painted |
| Material Type | Steel |
| Notes | Shortest depth when hidden is 4.25". Fully extended depth is 11.44" |
| Color | Black |
4.6
37 Reviews
Customers confirm that the product is of outstanding quality, very well-built and practical. It's repeatedly described as easy to install, with enough supplied wiring to connect comfortably. The product performs reliably, and there's a consistent emphasis on its potential to enhance the look of a vehicle, especially for custom and show cars. Some customers even praise the product for distinguishing their vehicles in car shows. However, some customers reported an issue with the product draining their batteries. Many customers have said they would opt to buy the product again, emphasizing its great finish and superior operation. The product is considered to be worth its cost due to its top quality design, functionality, and craftsmanship. Moreover, customers recommend the product as an ideal choice for customizing their street rods.
4.6
37 reviews
5
31
4
3
3
1
2
0
1
2
Most Liked Positive Review
5.0
Great product!
Looks and works great on my 40 Chevy. We replaced the fuse with a heavy duty one as the old model was not fused (not Speedway's fault). The old one almost electrocuted us. it gives a clean look to the car.
Most Liked Negative Review
3.0
I am experiencing unacceptable current draw with this unit.
Current draw occurs slightly more in the retracted "UP" position than in the extended "DOWN" position. However, after a week, my battery becomes discharged beyond use. Do you have schematics so I can possibly trace down why the clearing contacts are not stopping the current draw?
Filter by Ratings
Classic & Street Rods Great place to Shop
5.0
2 years ago
Jim Bob
Vassar mi
Verified
Worked out great !!! We have a 1937 five window coupe, that we chopped and put in 427 Chevy and now it is complete with the hidden plate. Great service and fast turn around . Thank you for your help .
Would Recommend
I am experiencing unacceptable current draw with this unit.
3.0
2 years ago
Pavo
San Diego
Current draw occurs slightly more in the retracted "UP" position than in the extended "DOWN" position. However, after a week, my battery becomes discharged beyond use. Do you have schematics so I can possibly trace down why the clearing contacts are not stopping the current draw?
Would Not Recommend
Would definitely buy again!
5.0
2 years ago
Smokey
Burlington NC
Had one for some time and started having an issue with it.I called tech to see if we could figure out what could be possible problem. Speedway decided to send me a new unit even though mine was past any warranty period. As a bonus I received a small refund due to the new one being on sale. I didn't call to try to get a replacement but was given one anyway. What a great company to deal with. Now I always look to Speedway before looking anywhere else. Thanks Speedway! You have a customer for life!
Would Recommend
Would buy this again
5.0
3 years ago
Bob
Delray Beach, FL
Verified
used to hide the plate on a '32 ford. Easy to install.
Would Recommend
Great product, not as easy as you think
4.0
3 years ago
Victor
Kennesaw, GA
Verified
The product is well built and for all appearances, it looks to be easy to install. The critical part to the install is understanding the finished height of the product retracted and extended and getting your mounting brackets fabricated just right. In my case, this was going on a 1940 Chevy street rod and I needed to fabricate a top support and angle bracket to mount this assembly to. After changing the setup a couple of times, my final support and install worked great. Something that should be an additional consideration is that you will need to determine how you will mount a license plate light. I wound up bonding an LED one on the plate just above the license plate so the light pivots with the plate. I opted for the polished stainless steel finish. Be careful, the edges are sharp. Looks amazing but in honesty, the SS aspect is not really seen since the license plate covers most of the extended bracket and with my finished install height, there is no exposed bracket. Had my finished install had the extended plate lower and you could see part of the bracket, maybe the SS finish would be worth it. I would not spend the extra next time. I also think the price is a bit over the top but as I said earlier, it seems to be a quality product.
Yes
5.0
3 years ago
Spyda
Newton MA
Verified
I have a drenched in rear plate but I'm using the hide away plate to mount LED backup lights that fold down and turn on when I shift into reverse
Would Recommend
Well built product worth the money.
5.0
3 years ago
Stephen Vecchiarelli
Granby Colorado
Verified
Easy install works great.
Would Recommend
Would not purchase again
1.0
3 years ago
KR
Ooltewah,TN
Worked for about a year then started running the battery down overnight. Returned and had the same problem with the new one.
Would Not Recommend
Hide away license plate
5.0
3 years ago
Moon Millikan
Tennessee
Verified
We have used several. Easily adjustable and easy to mount. Great for the rear plate. Simple wiring.
Would Recommend
Third one I've installed,
5.0
4 years ago
L-B
Reno nv
Verified
Loosing the license plate at car shows, and more importantly with airbags, when I drop it, you don't beat up the license plate.
Would Recommend
Showing 10 of 37 reviews
6 Questions • 12 Answers
does this unit have clearing contacts that stop current draw when in full position up and down
by phil
• 7 years ago
1 answer
View Answer
Will this work on 1955 chevy ?
by DANNY
• 7 years ago
4 answers
View Answers
Altec brand kit seems to have a lot of flaws. Is this made for daily driven cars?
by Key
• 10 years ago
1 answer
View Answer
Does anyone have a video of the braked installed and actuating? Im having hard time picturing it. If some one could post video of it retracting and displaying the plate. Thanks
by Jerry
• 11 years ago
1 answer
View Answer
I have a 2011 porsche 911 will your hidden license plate be good for the front of the car.
by
• 15 years ago
2 answers
View Answers
Will this support my existing billet license plate frame with the built in license light?
by Jerry
• 15 years ago
3 answers
View Answers
6 of 6 questions shown
