$124 Off

$124 Off

#UP231134

CAMSHAFT KIT

Open Box
Item is in like-new condition. Original packaging may be damaged or missing. Please review the description for additional details
This Edelbrock cam kit produced 330 ft-lbs. of torque when used with #3711 intake and stock iron cylinder heads on a 350 engine.

$266.80

/each

In Stock

$390.95

Save $124.15

Order soon, only 1 left in stock!

Item is in like-new condition. Original packaging may be damaged or missing. Please review the description for additional details.

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Hydraulic Flat Tappet Camshaft Type, Lifters Included

Open Box
Item is in like-new condition. Original packaging may be damaged or missing. Please review the description for additional details
This Edelbrock cam kit produced 330 ft-lbs. of torque when used with #3711 intake and stock iron cylinder heads on a 350 engine.
The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm.
This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s.
You can expect a major improvement in throttle response and torque.
All camshafts include flat tappet lifters, assembly lube and instructions.

See more details

Key Specs

Garage Sale Type	Open Box
Camshaft Type	Hydraulic Flat Tappet
Intake Duration (.050" Lift)	204
Exhaust Duration (.050" Lift)	214
RPM Range	Idle-5,500

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Ineligible for Return

Contains items that cannot be returned

Edelbrock 3712 Details

Garage Sale Product

This is Garage Sale priced because it is a factory shipped open box item and returned that we don't carry in house.

NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

Edelbrock part #3712 Performer-Plus camshaft is designed for small-block Oldsmobile 350-403 V-8 applications.

This Edelbrock cam kit produced 330 ft-lbs. of torque when used with #3711 intake and stock iron cylinder heads on a 350 engine.
The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm.
This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s.
You can expect a major improvement in throttle response and torque.
All camshafts include flat tappet lifters, assembly lube and instructions.

Camshaft Specifications: - Duration @ .050 Intake: 204 degrees - Duration @ .050 Exhaust: 214 degrees - Lift @ Valve Intake: .449" - Lift @ Valve Exhaust: .473" - Lobe Separation: 114 Degrees - Intake Centerline: 106 Degrees - Idle Vacuum @ 1000 RPM's: 16"

CARB Warning

Follow EPA, CARB, and state regulations for engine changes

Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine

CA WARNING:

Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov

CARB warning

Edelbrock 3712 Specifications

KEY SPECS
MFG. Part #	3712
Brand	Edelbrock
Garage Sale Type	Open Box
Camshaft Type	Hydraulic Flat Tappet
Intake Duration (.050" Lift)	204
Exhaust Duration (.050" Lift)	214
RPM Range	Idle-5,500
Lobe Separation	114 °
Lifter Type	Hydraulic Flat Tappet

GENERAL
Intake Valve Lift w/ Rocker Arm Ratio	0.448"
Exhaust Valve Lift w/ Rocker Arm Ratio	0.472"
Computer Controlled Compatible	No
Sold in Quantity	Kit
Intake Duration	280
Exhaust Duration	290
External Ignition Box Required	No
Valve Spring Required	Yes
Valve Springs Required	Yes
Valve Spring Included	No
Lifters Included	Yes
Retainers Included	No
Locks Included	No
Valve Stem Seals Included	No
Timing Chain and Gears Included	No
Assembly Lubricant Included	Yes
Pushrods Included	No
Rocker Arms Included	No
Gaskets Included	No

Ratings & Reviews

Be the first to write a review.

Questions & Answers

Be the first to ask a question.