|
#9109600
Edelbrock 1406 Performer 600CFM Carb w/8131 and 81233 Fuel Line
- Bolt-on-and-run performance right out of the box
- Lightweight all-aluminum body is compatible with gasohol and blended fuels
- Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
$590.85
/kit
In Stock
$598.84
Save $7.99
Quantity
Need Help? Call to Order
Add to a list
Share
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, 4-Barrel Carburetor Barrels, 600 CFM CFM
- Bolt-on-and-run performance right out of the box
- Lightweight all-aluminum body is compatible with gasohol and blended fuels
- Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
- Chrome Steel Fuel Inlet for Edelbrock carburetors provide a clean and custom plumbing solution
- These high-quality fuel line kits offer a clean and precise fuel supply line for mechanical fuel pumps with a 3/8" NPT outlet, when using an Edelbrock Single- or Dual-Feed fuel inlet kit
Comes as a Kit
View Kit Components
Key Specs
| Carburetor Barrels | 4-Barrel |
| Fuel Type | Gasoline |
| Choke Type | Electric |
| CFM Range | 600-699 CFM |
| CFM | 600 CFM |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyDetails
Details
Kit Includes:
- (1) Edelbrock 8131 Performer Carb Fuel Line Kit & Fuel Filter, -6 AN Inlet
- (1) Edelbrock 1406 Performer 600 CFM 4 Barrel Carburetor, Electric Choke
- (1) Edelbrock 81233 ProClassic Fuel Line, Small Block Chevy
- (1) Carburetor Stud Kit, 1-3/8 Inch
Edelbrock 8131 Performer Carb Fuel Line Kit & Fuel Filter, -6 AN Inlet
- The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing
- The Edelbrock #8131 includes a polished aluminum fuel filter with a 40-micron filter element and -6 AN male inlet will accept an Edelbrock fuel line kit for a complete fuel pump to carburetor plumbing solution
- The Edelbrock #8131 is manufactured of plated steel and include a 5/8" -20 threaded banjo bolt with gaskets
Edelbrock 1406 Performer 600 CFM 4 Barrel Carburetor, Electric Choke
- Electric choke
- Bolt-on-and-run performance right out of the box
- Smooth throttle response throughout the power band
- Lightweight all-aluminum body is compatible with gasohol and blended fuels
- Includes both timed and full vacuum ports for ignition advance
- Uses metering rods to transition between circuits - rods can be changed in seconds without carburetor removal or draining fuel
- Float levels are factory set; adjustments are rarely needed
- Change jets, adjust floats & replace needles/seats without draining fuel or removing carb
- Two-piece design means no gaskets below the fuel level for leak-free operation
Edelbrock 81233 ProClassic Fuel Line, Small Block Chevy
- For Performer Series Carburetors
- Pre-fitted Stainless Lines
- Connects From Filter to Pump
- (For S/B Chevy, S/B Chrysler, and B/B Chrysler)
Carburetor Stud Kit, 1-3/8 Inch
- Easy installation/removal of carb plates
- Includes zinc plated steel studs, nuts and washers
Specifications
Specifications
| KEY SPECS | |
|---|---|
| Brand | Edelbrock |
| Carburetor Barrels | 4-Barrel |
| Fuel Type | Gasoline |
| Choke Type | Electric |
| CFM Range | 600-699 CFM |
| CFM | 600 CFM |
| Carburetor Flange Type | 4-Barrel Square Bore |
| Finish | Natural |
| Material Type | Aluminum |
| Color | Silver |
| Secondary Type | Air Valve |
| Fuel Inlet Type | Single |
| Gasket(s) Included | Yes |
| New or Remanufactured | New |
| Throttle Linkage Type | Universal |
| Supercharged Application | No |
| GENERAL | |
| Sold in Quantity | Kit |
Ratings & Reviews
Ratings & Reviews
Questions & Answers
Questions & Answers
Be the first to ask a question.

