Deluxe Hard Line Tool Kit, Cut/Bend/Flare, 3/16 Inch

Quickly get to work flaring brake lines or other 3/16 inch hard lines with our Deluxe Hard Line Tool Kit. This includsive kit has our tubing straightener to start your tubing on the straight and narrow. We have included our Deluxe SAE double flare 45-degree brake flaring tool and a 37-degree AN flaring tool so you can get professional flares for both fitting types. In the kit we have our Handheld Lever Tubing Bender to aim your tubing in exaclty the direction you need it to go, and we have our tubing cutter to trim it to the correct length for your project. To round out the kit we've added the Koul Tools P-51 Sure Seat Lapping Tool to allow you to lap-in flared tubing to elimate leaks in you hard line joints. 

The Deluxe Hard Line Tool Kit works with OE steel, stainless steel, aluminum, or copper tubing for brake systems, fuel systems, and more. 

• 45-Deg Brake Flare Tool turret-style design allows you to make those precision flares in minimal time
• Handheld Tubing Straightener features 16 steel rollers inside the tool that allows for the line to be easily pushed/pulled through, removing any bend/curvature from the hard line
• Lever type tubing bender features a 10" handle that gives plenty of leverage to make smooth, professional, 5/8" radius bends 
• 37-Deg Flaring Tool feed screw handle requires less motion and effort than standard handle, provides smooth, uniform flares with minimum effort
• P-51 Sure Seat Lapping Tool removes irregularities in the flare and hones it to a perfect angle to enable the tube to seat with the fitting

Hard Line Tool Kit Contents

• 3/16 Inch Handheld Tubing Straightener
• Handheld Lever Tube Bender, 3/16 Inch
• 37-Degree Flaring Tool
• Deluxe 45-Degree Brake Line Flaring Tool
• Koul Tools P-51 Sure Seat Lapping Tool, 37 & 45 Degree Flares
• 1/8" to 1-1/8" Tubing Cutter

How to use the Handheld Tubing Straightener:

Step One - Roll out short length of hard line from roll

Step Two - Insert hard line into and then through the internal rollers that are inside the tool

Step Three - Pull/Push the hard line through the tool and over the length of the hard line. This will straighten the hard line by removing any bends or curvature from the line.