Daytona Sensors 112001, WEGO III Wide-Band AFT Display

WEGO 3 SDL Wide-Band AFR Kit (WEGO 3 Single Display and Logging unit with 42” harness, LSU 4.2 oxygen sensor, and 18 x 1.5 mm weld nut for exhaust pipe. Downloadable software available on Daytona Sensors website)

IMPORTANT NOTE! – DO NOT ATTEMPT to clean any O2 sensor in gasoline or any type of solvent!  Doing so will VOID any warranty.  Please contact the Daytona Sensors Tech Dept. if you have any questions about this topic.

• Single and dual channel air/fuel ratio display systems with built-in data logging. Kits include WEGO unit, LSU 4.2 5-wire wide-band oxygen sensor(s), and 18 x 1.5mm weld nut(s) for mounting sensor(s) on exhaust pipe. Downloadable software available from our website

• Versatile tuning aid for all carbureted and fuel injected engines, displays air/fuel ratio (AFR) and logs over 2hrs data including AFR, engine RPM, and a spare 0-5V analog input for sensors such as throttle position or manifold pressure

• Can be used for on-road or dyno testing

• Suitable for automotive, motorcycle, and other small engine applications

• Highly accurate with less than ±0.10 AFR error over 10.3 - 19.5 AFR range (±0.007 Lambda error over 0.70 - 1.33 Lambda range)

• Easy free-air calibration procedure corrects for sensor aging effects

• 0-5V analog AFR output for interface to dyno instrumentation

• Ultra-bright daylight readable blue LED display with automatic dimming under low light conditions

• Wide supply voltage range from 11-16V allows operation from battery on small engines and race vehicles without an alternator. Current drain is approx. 1 amp per channel

• Built-in USB interface

• WEGO 3 SDL is fully encapsulated with a waterproof LED display

• WEGO data logging software runs under Windows XP-10. The software allows viewing and analyzing AFR, engine RPM and analog data with user defined scaling. Calculated fuel correction data can easily be copied/pasted into other engine tuning programs