Daytona Sensors 111004, WEGO III DN Kit

WEGO III DN Kit (includes WEGO III DN, two LSU 4.2 wide-band oxygen sensors, and two 18 x 1.5mm weld nuts) (inc. WEGO IIID without display, 2 sensors and 2 weld bungs)

 

• Complete air/fuel ratio (AFR) display system with built-in data logging

• Displays Lambda or correct AFR values for any hydrocarbon fuel with a known stoichiometric ratio

• Input for optional customer supplied flex fuel sensor. A switch under the sensor 2 LED allows selection of normal AFR display or 0-100% ethanol display

• Measurement range is 10.3 to 19.5 gasoline AFR or 0.70 to 1.33 Lambda

• Highly accurate with less ±0.10 AFR or ±0.007 Lambda error over entire range

• Easy free-air calibration procedure corrects for sensor aging effects

• 0-5V analog AFR outputs for interface to dyno instrumentation

• Waterproof ultra bright daylight readable blue LED display with automatic dimming under low light conditions

• Wide supply voltage range from 11-16V allows operation from battery on small engines and race vehicles without an alternator. Current drain is under 2 amps