Dakota Digital VHX-65C-IMP-S-B VHX Instruments, 65 Impala, Silver

With the grace of a swan and the girth of a Jr. High school, the all-new styling of Chevy's fullsize line was the best of both worlds and an instant classic. With your stock bezel in hand, this instrument system is a simple bolt-in affair that springs the classic dash into the 21st century. Supplied sensors accommodate any drivetrain combination.

Fully lit needles, backlit faces, and highly visible LCD message centers are a few of the things that you can see which set the VHX Series apart from yesterday's traditional approach to instrumentation. A few of the features which you don't normally see are the micro-controlled precision stepper motors, solid state sensors for unparalleled accuracy, and user-customizable display feedback, all supported by an unrivaled limited lifetime warranty which has become the standard for Dakota Digital instrumentation systems . Completely engineered and manufactured at our facility in Sioux Falls, South Dakota, the VHX Series has completely revolutionized the instrumentation industry!

• 1965 Chevy and Impala VHX Instrument Panel
• Silver Alloy Background
• Fits directly into existing bezel (not included)
• LED back lit technology
• Includes temp, oil pressure, and speed sender

Analog Gauges

Speedometer: 0 -140 MPH (optional metric version 0- 225 kmh)

Tachometer: 0- 8,000 RPM

Oil Pressure: 0- 80 psi

Water Temperature: 100- 260°F (optional metric version 40- 120°C)

Fuel Level: E, 1/4, 1/2, 3/4, F

Voltmeter: 9- 17 VDC

Lighting: Back lit technology is popular with performance instrumentation due to precise lighting allowing you see what is truly important when you really need it at a quick glance. Each number, tick mark, annunciator, needle, indicator and digital message center is lit by a series of LEDs behind the gauge face.

Standard Displays

Odometer (One time user settable, Million Mile)

Dual (A/B) Trip Meter (0- 9,999.9)

Clock (12 hour)

Performance Meters

0- 60 MPH Timer (0- 100 kmh)

1/4 mile time

1/4 mile end speed (trap speed)

High speed recall

High RPM recall

Gauges

Speedometer (0- 255 MPH/kmh)

Tachometer (0- 9,900 RPM)

Oil Pressure (0-100 psi displayed in 1 psi increments)

Water Temperature (100- 300°F/ 40- 150°C displayed in 1 °F/°C increments)

Voltmeter (9- 17 VDC)

Fuel Level (0-99% full)

Lighting

Turn Signals (Left/ Right)

High Beam

Check Engine

Parking Brake

Cruise Control (On/ On And Engaged when vehicle is equipped)

Gear Position (Optional GSS-3000 sensor required)

4 x 4 (When vehicle is equipped)

Wait to Start (When vehicle is equipped)

**Not all OEM indicator lamp functions will be replaced

Included Sensors

Water Temperature: 1/8" NPT, ground isolated sensor with a 10 ft harness

Oil Pressure: 1/8" NPT solid state sensor with a 10 ft harness

Cable Driven Speed Sensor/ Generator: Replaces GM style speedometer cables with a 10 ft harness. Sensor requires approximately 5" clearance extending between the cable drive output and any obstruction.

Bushings: Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads.

Control Box Dimensions: 5.5" x 3.5"x 1"