|
#35610409
$13.49
/set
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
.75" Inside Diameter, 6.00" Overall Length
Need help?
855.313.9176Quick and Easy Returns
Return PolicyCA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 010409 |
| Brand | DEI |
| Overall Length | 6.00" |
| GENERAL | |
| Inside Diameter | .75" |
| Notes | Set of 4 |
| Sold in Quantity | Set |
| GTIN Code | 607078104090 |
4.4
12 Reviews
Customers appreciate the product for its primary function which is the protection of ignition wires and plugs from exhaust heat. They report that it offers practicality and works well, particularly on straight plug wires, leading to fewer instances of melted parts. The product was also described as easy to install, though some users noted it may require adjustments for 90-degree boots. Although some commented it is not aesthetically pleasing, the overall consensus is that the product is effective and reliable. Many customers stated they would repurchase it. Therefore, it offers a solid and marketable solution to a common issue.
4.4
12 reviews
5
8
4
1
3
3
2
0
1
0
Most Liked Positive Review
4.0
Works technically
Technically I guess it works and for the price I can't complain. It just didn't look how I imagined it would look once in place. It's not the cleanest looking setup. I was replacing all my plug wires so I slipped them over before crimping the head of the wires. I could not fit it over the wire with the head crimped on. Something to think about.
Most Liked Negative Review
3.0
You have to make them work.
They do not fit over the 90o plug wires on the SBC straight plugs. You have to cut the sleeves and staple them around the wires or install them before you crimp on your ends but they will not fit after wire installation.
Filter by Ratings
Functional not beautiful
3.0
4 years ago
Lloyd
Washington
Verified
Functional not beautiful
Would Recommend
Good product
5.0
4 years ago
Glenn R
Auburn PA
Verified
Easy install, worked well.
bought before would buy again
5.0
6 years ago
kaz
so. fl
Verified
to protect my ignition wires
Would Recommend
Just what the doctor ordered
5.0
6 years ago
Ogan
St. John in.
Verified
Put hugger headers on my street rod and spark plug wires at two different locations were very close didn't wanna take a chance of burning them up this product works perfectly.
Would Recommend
Must have for headers
5.0
7 years ago
Zachbra
Canaveral groves, florida
Verified
Last set of wires I had never touched the header but melted within a few hundred miles. This has been an easy solution.
Would Recommend
I would buy again
5.0
8 years ago
Len
PA
Verified
Seem to protect wires near the boot from heat damage from the headers
Would Recommend
I would buy this product again
5.0
8 years ago
D's Camaro
Stickney IL
Verified
I used a them on my 2015 Camaro
Would Recommend
Great product.
5.0
9 years ago
Art M.
Kentucky
Verified
Seems to be a great product.
Would Recommend
Works technically
4.0
9 years ago
David
Houston, tx
Verified
Technically I guess it works and for the price I can't complain. It just didn't look how I imagined it would look once in place. It's not the cleanest looking setup. I was replacing all my plug wires so I slipped them over before crimping the head of the wires. I could not fit it over the wire with the head crimped on. Something to think about.
Would Recommend
You have to make them work.
3.0
11 years ago
hemidan
So.Cal.
Verified
They do not fit over the 90o plug wires on the SBC straight plugs. You have to cut the sleeves and staple them around the wires or install them before you crimp on your ends but they will not fit after wire installation.
Would Recommend
Showing 10 of 12 reviews
1 Question • 1 Answer
Has there been an improvement in the spark plug wire shield boot protector #6982524? I understand there was a problem on the protectors going on a 90 degree boot.
by Fred
• 9 years ago
1 answer
View Answer
1 of 1 questions shown
