Speedway Motors Garage Organization Wall Storage Gift Set

Kit Includes:

(1) Cordless Drill/Small Impact Holder

(1) 4 Way Lug Nut Wrench Tool Holder

(1) Tire Pressure Gauge Holder

(1) Air Tool Holder Rack

(1) Wall Mount Flashlight Holder

 

Speedway Motors Cordless Drill/Small Impact Holder

This drill holder is great for the trailer or shop to organize your tools.  It will work well with cordless drills as well as battery powered small impacts such as 1/4" and 3/8" sizes. It mounts to any flat surface using the pre-drilled 1/4" mounting holes. The sturdy 1/8" aluminum construction ensures it will last as long as your drill does, or even longer. Why have your drills and impacts laying around the trailer or garage? Organize your workspace today!

• Mounts to any flat surface
• Constructed of 1/8" rolled aluminum
• 1/4" mounting holes are pre-drilled
• 5" center-to-center spacing of mounting holes
• 6-1/2" overall width
• 3-1/2" gap between hooks
• 2-7/8" depth from wall to outer edge of hooks

So, whether your existing race car trailer could use a little organization help, or you are looking to outfit your new race car trailer and start the season off with top notch storage solutions to keep your trailer clean and work ready, Speedway Motors’ line of trailer organizers, tie downs, winches, and more will help create that clean, functional trailer you have always wished for.

Speedway Motors 4 Way Lug Nut Wrench Tool Holder

•  Laser cut and press bent from .125-inch thick aluminum
• Mounts via three pre-drilled 1/8-inch holes
• Attaches via tapping screws, bolts, or rivets (user provided)
• Mount to shop wall, trailer wall/cabinet, your toolbox, or rolling cart for quick access
• Fits most 4-way style universal lug wrenches

The Perfect Home for Your 4-Way Lug Wrench

The humble 4 way lug wrench, or universal lug wrench, is an extremely popular wheel tool for removing lug nuts. Rightfully so, it handles four different sizes of lug nut sizes and its welded X-style provides plenty of leverage for loosening or tightening. There’s a good chance at least half the garages in the world have one of these 4-way lug wrenches lying around. Which in lies its biggest problem. Due to its generous size, a 4 way lug wrench is often chucked under a workbench or possibly leaned up against the wall somewhere to get kicked around or tripped over. We now have this ingenious little wrench holder available that will keep your lug wrench at the ready.

Constructed from laser cut .125-inch (1/8-inch) aluminum, our 4-way lug nut wrench holder is the perfect answer to keeping your lug nut wrench safe and ready for when you need it. Whether it is to rotate the tires on your daily driver, or help the neighbor change out a flat tire, your lug wrench will be right where you need it without having to dig your lug nut wrench out from its normal hiding spot under your toolbox, hanging from the rafters, or wherever you’ve stashed it in the past.

Mounting our wrench holder is easy using the included 1/8-inch holes and suitable fasteners for the surface you’re attaching it to (trailer wall, shop wall, side of your toolbox, etc.). This means tapping screws or rivets for most installations. The design cradles the specific shape of 4-way wheel wrench and provides ample room for the main body of the lug wrench to sit securely. Your universal lug wrench will always be at the ready on the wall of your car trailer or the side of your toolbox, or pretty much anywhere you decide to mount it! So, order one of our custom wrench holder brackets today and get your 4-way lug wrench off the floor and out of the way, and if you own one of our Quick Change Racing Lug Wrench models, we offer a mounting bracket for this design as well.

So, whether your existing race car trailer could use a little organization help, or you are looking to outfit your new race car trailer and start the season off with top notch storage solutions to keep your trailer clean and work ready, Speedway Motors’ line of trailer organizers, tie downs, winches, and more will help create that clean, functional trailer you have always wished for.

Speedway Motors Tire Pressure Gauge Holder

• Laser cut and press bent from .125-inch thick aluminum
• Mounts via two pre-drilled 1/8-inch holes, 2-1/2-inches center to center
• Attaches via screws, bolts, rivets, or industrial grade double sided tape
• Mount to shop wall, trailer wall/cabinet, your toolbox, or rolling cart for quick access
• Fits most any motorsport-style tire pressure gauge from 2- to 4-inches in diameter
• Doubles as a mud scraper holder for you dirt track racers

Have Your Tire Pressure Gauge at The Ready Wherever You Are

Having the correct tire pressure for track conditions is critical to tire life, traction, and more. On the home front, ensuring your daily’s tire pressures are spot on helps with fuel economy, tire wear, and handling too. Using an accurate tire pressure gauge is not only paramount to obtaining precise tire pressure readings but having your tire pressure gauge handy when you need it is just as important.

A superior quality analog or digital tire pressure gauge is an instrument, and instruments need to be handled with care to retain their accuracy. Just like you’ve been taught to return a torque wrench to “zero” scale before putting it away, tire pressure gauges need to be handled with care and not just tossed into a toolbox drawer. Having a dedicated storage solution for your tire pressure gauge means it has a “home” where the gauge will always be when you need it, and it will be stored safely where other heavy tools can’t damage it.

Simple, Yet Effective Mounting Solution Keeps Your Tire Pressure Gauge Safe

Constructed from laser cut .125-inch (1/8-inch) aluminum, our tire pressure gauge holder is the perfect answer to keeping your favorite analog or digital tire pressure gauge safe and at the ready for when you need it. Whether it is pre-race setup at your pit trailer or making sure the family truckster is ready to go for the family vacation, your gauge will be right where you need it without digging through your toolbox drawers or back tracing your steps wondering where you left it last.

Our tire pressure gauge holder is designed to hold most motorsport-style round pressure gauges from 2-inches to 4-inches in diameter with a maximum depth of 1-3/4-inches, and as an added bonus for you dirt track racers it can also hold your favorite mud scraper too! A generous cutout provides room for the pressure relief valve and attached gauge hose to hang freely. Two 1/8-inch diameter mounting holes are provided for mounting, which can be accomplished with rivets or tapping screws. Hang your analog or digital tire pressure gauge in your race car trailer or workshop, and on race day transfer it to a second hanger on the side of your pit box. It takes only minutes to install and at this price point you can buy several to ensure no matter where your gauge is being used it has a safe home to go back to when you’re done using your tire pressure gauge.

Speedway Motors Air Tool Holder Rack

• 18-inch long rack provides mounting slots for up to 17 air tools
• Additional holes and slots are provided to store small tools and accessories
• Built from laser cut and press bent .090-inch thick H32 aluminum
• 20-degree tool shelf angle ensures tools don’t fall out when bumped
• Tool slots are spaced two inches apart and upper and lower rows are staggered
• Mounts via three 1/4-inch holes and your choice of mounting fasteners

Store Your Air Tools Neatly in Your Garage or Trailer for Quick Access

Air tools make any job easier, that’s a given. We all remember the first time we used an air ratchet versus a hand ratchet and why we waited so long to invest in an air compressor and air tools. As your collection of air tools grows the problem becomes where to store the tools for easy access, especially if it is in a working shop where time is money. A drawer full of air tools means having to walk back to your tool box each time you need a tool. Not to mention digging through that drawer full of tools for the air tool you need and any accessory or adapter. A better solution is to have an air tool storage rack closer to your work area or air source and our aluminum air tool holder is the perfect solution.

Having your most used air tools nearby not only makes more efficient use of your time, but you can also quickly change from one tool to another without having to go back to your tool box multiple times. This is especially helpful for race car trailers. Mount your air tool hanger rack on your trailer door and quickly access the air tools you need for repairs instead of going inside the trailer to a tool box or cabinet drawer multiple times. Even for a home shop or garage, having this air tool rack near your work area (mount it to the side of your two- or four-post lift, next to your compressor, etc.) you can quickly load the air tool storage rack with the air tools you’ll be using for the task you’re about to handle, again saving you that time of running back and forth to your tool box that is at the back garage wall. It is the perfect addition to our growing line of aluminum trailer/shop organizer accessories.

Laser Cut Aluminum That Holds Up To 17 Air Tools and Accessories

Laser cut and press bent from .090-inch H32 aluminum, our air tool rack has the strength to support all the tools you own. Up to 17 tools in fact thanks to 2-inch tool spacing and staggered tool spacing between the upper and lower shelves. The 20 degree angled lip ensures tools stay in place and won’t fall off. The dual dimension slots support multiple air coupler fitting sizes so your tools will fit no matter if you’re using industrial or automotive type fittings, or even if they are high-flow style fittings. We have provided additional holes and slots in both shelves to store air tool wrenches, grinding/surface prep discs, air tool oil, and other tools. The air tool hanger rack can be attached to most any surface via the three pre-drilled 1/4-inch mounting holes. Installation hardware is not included due to the varied surfaces this can be attached to, but rivets, tapping screws, or through bolts with nuts are all possible depending upon the surface you are attaching the rack to.

Speedway Motors Wall Mount Flashlight Holder

• Laser cut and press bent from .130-inch (1/8-inch) thick aluminum sheet stock
• Holds standard C or D cell flashlight, including popular Maglite flashlights for convenient storage
• 1-3/4-inch diameter mounting hole works with most “stick” style flashlights
• Rubber mounting rings protects your expensive flashlight and eliminates rattles
• Mounts via four pre-drilled 1/8-inch holes to shop or trailer wall, cabinet, toolbox, or rolling cart
• Flashlight holder attaches via tapping screws, bolts, or rivets (user provided)

Give Your Flashlight A Home So You Always Know Where It Is When You Need It

Every shop, car trailer, or toolbox should have at least one dedicated flashlight. We’ve lost track of just how many we own, but suffice to say, we have at least one in every toolbox, the workbench, in the car trailer, and more. Super handy for those late nights packing up after a race, or for a roadside emergency, a good flashlight is a necessity. Having a secure place to store your flashlight is just as important, which is why we’ve added this aluminum flashlight holder to our line of trailer/shop aluminum accessories.

Made from 1/8-inch aluminum plate that is laser cut and press bent into shape, the compact size of our wall mounted flashlight holder at just 3 inches wide by 3 inches deep means it can be mounted in the smallest of places. The generous 5-1/4 inch length provides stability for your flashlight during storage, be it a 2 D cell flashlight or an extra-long 6 D cell flashlight, such as the popular Maglite flashlight models. The rubber rings on our wall mounted flashlight holder prevent scratching your flashlight’s finish with no metal on metal contact. The through holes accept up to a 1-3/4-inch diameter flashlight body. Four 1/8-inch mounting holes provide a secure mounting solution for your wall mounted flashlight via installer’s choice of mounting fastener, such as rivets, tapping screws, or even through bolts with nuts.

So, whether your existing race car trailer could use a little organization help, or you are looking to outfit your new race car trailer and start the season off with top notch storage solutions to keep your trailer clean and work ready, Speedway Motors’ line of trailer organizers, tie downs, winches, and more will help create that clean, functional trailer you have always wished for.