Competition Engineering C2710 Adjustable Drag Shock, 67-81 Camaro/FB
70-81 Chevy Camaro, 70-81 Pontiac Firebird, Mono Tube Shock Type, Steel Shock Body Material
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
Competition Engineering’s 3-Way Adjustable Drag Shocks are designed to allow the racer to dial-in the race car to meet changing track conditions. Shock valving plays a very important role in the way your car will perform both during initial launch and throughout the quarter mile. The principle behind Competition Engineering's shock absorber design is to allow the front end of the race car to rise rapidly upon initial launch, creating greater weight transfer and better traction to the rear tires. As the car travels down the track, the front end will gradually descend to its ride height without unloading the rear tires which is a major cause of wheel spin. Our rear shocks work in conjunction with our front shocks making the transition from initial launch to top end charge as smooth as possible.
Competition Engineering’s Front Drag Shocks are adjustable in three ratios: 90/10, 80/20 and 60/40. These ratios reflect the percentage of force required to extend and compress the shock absorber. You can quickly change the valve setting by simply compressing the shock fully and rotating the shaft until the indexing notch mates with the desired setting on the body. It’s as simple as twist and click. The Rear Drag Shocks are also adjustable in three ratios: 70/30, 60/40 and 50/50. These ratios also represent the percentage of force required to compress and extend the shock unit. Only this time, the first number is compression and the second extension. These shocks also adjust by compressing them fully and rotating to the desired setting on the body.
- Monotube design
- Fits 1967-81 Camaro/Firebird
- Sold each
Fits; Chevrolet Camaro 1970-81 and Pontiac Firebird 1970-81
More Like This
Competition Engineering C2610 Adjustable Drag Shock, 1957-86 Ford/GM
QA1 27583-5M 27 Series Shock, 13/21.38 Comp/Ext, 3-5M Valving
QA1 27583-7M 27 Series Shock, 13/21.38 Comp/Ext, 3-7M Valving
QA1 27583M 27 Series Shock w/ Hyperscrew, 13/21.38 Comp/Ext, 3M Valving
QA1 27584M 27 Series Monotube Shock, 13/21.38 Comp/Ext, 4M Valving
QA1 27587-2M 27 Series Monotube Shock, 13/21.38 Comp/Ext, 7-2M Valving
QA1 27585-3M 27 Series Shock, 13/21.38 Comp/Ext, 5-3M Valving
QA1 27585-8M 27 Series Shock, 13/21.38 Comp/Ext, 5-8M Valving
QA1 27585M 27 Series Shock w/ Hyperscrew, 13/21.38 Comp/Ext, 5M Valving
QA1 27A583-6M 27 Series Monotube Shock, 13/21.38 Comp/Ext, 3-6M Valving
Q & A
Tim talks about what options we have for hot rod shocks.
Speedway Motors employee Pat O. talks about shock ends.
Call Our Experienced Shock Techs For Details At 800.979.0122. Shipping Information ... Have Your Shocks Dyno Tested To Ensure Optimum Performance!
In this episode, Project Chevelle gets coilovers and a much-needed altitude adjustment. Watch as we install QA1 bolt-on coilover kits front and rear, then dial in the perfect stance and shock settings. Our old Chevelle is really starting to look mean!