|
#5501390
$4.89
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
2.375" Overall Width, 0.375" Overall Diameter, Chrome
| MFG. Part # | 5501390 |
| Brand | Speedway Motors |
| Overall Length | 5.208" |
| Thread Pitch | 1/4"-20 |
| Finish | Chrome |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyPremium chrome plating and classic styling make this hold down the first choice of rodders everywhere! Wing nut threads are extra-long to accommodate nearly any combination of valve cover, clamps and gasket thickness. Just cut off to length you need. Sold individually.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 5501390 |
| Brand | Speedway Motors |
| Overall Length | 5.208" |
| Thread Pitch | 1/4"-20 |
| Finish | Chrome |
| GENERAL | |
| Overall Width | 2.375" |
| Overall Diameter | 0.375" |
| Thread Length | .900" |
| Sold in Quantity | Each |
4.7
28 Reviews
Customers commend the product for its optimal fit and excellent performance, especially in usage with vehicles such as a 305 SBC T Bucket and 1946 Chevy. The product is praised for its high-quality chrome finish and its durability. It is especially appreciated for its affordability yet comparable quality to more expensive brands. Despite being a simple part, it effectively serves its purpose while adding an "old school" look to the valve covers. Some customers faced initial concerns about its length; however, it was reported to fit snugly in most cases. While there were a few exceptions, the majority confirmed that these items do their job, enhancing the overall appearance and practicality of their vehicles while remaining economically feasible. The customers are pleased with the quality and cost-effectiveness and would recommend it to others.
4.7
28 reviews
5
22
4
4
3
1
2
1
1
0
Most Liked Positive Review
5.0
Just right, and includes the washers
Have a 305 SBC in my T Bucket and the other day I see smoke coming up of the passenger side, turns out both lower T Bolts on that valve cover were lose. I could not get one to thread, the other would thread in either hole, so I guess it was barely long enough and the end of it stripped. So I ordered a few of these and it runs down nice and deep. I go through the plug wire organizer (very thin) and some fairly thick hold-down clamps. No problem with these, in fact I starting to wonder if they would snug up or if I would have to cut them a little, but they did snug up just fine. Very happy with the price and result.
Most Liked Negative Review
2.0
Far from "extra long" threads
Installing some polished valve covers on a new crate motor and was only able to get maybe 2 threads in. They look good but wont do me any good.
Filter by Ratings
I would buy again
4.0
a year ago
Harry
Buffalo ny
Verified
Great looking, would've been 5 stars if you didn't have to cut to length
Would Recommend
I would purchase this item again
5.0
a year ago
frank
Norfolk, NE 68701
Verified
Wing nuts look nice, will look great along with the finned valve covers on my stroker.
Would Recommend
I would buy again
5.0
2 years ago
Chair
Fairfield. CA
Verified
The recent product is great but i purchasrd a 1923 T Buckit fibre glass body and when it came to installing the windsheild you nolonger stock or have any idea if you ever will provide the necessary brackets to install the windsheild. Not very nice
Would Recommend
Just right, and includes the washers
5.0
3 years ago
Golf or Cruising?
Albuquerque, NM
Have a 305 SBC in my T Bucket and the other day I see smoke coming up of the passenger side, turns out both lower T Bolts on that valve cover were lose. I could not get one to thread, the other would thread in either hole, so I guess it was barely long enough and the end of it stripped. So I ordered a few of these and it runs down nice and deep. I go through the plug wire organizer (very thin) and some fairly thick hold-down clamps. No problem with these, in fact I starting to wonder if they would snug up or if I would have to cut them a little, but they did snug up just fine. Very happy with the price and result.
Would Recommend
I would buy this product again
4.0
3 years ago
Jerry the F650 guy
Wyoming
Verified
Nice addition to old school Holley valve covers, at an afordable price
Would Recommend
Yes
5.0
4 years ago
Jack
Woodstock NY
Verified
On my T Bucket
Would Recommend
Yes i will buy this product again
5.0
5 years ago
Jaymie
Hamilton Ohio
Verified
They look old school
Would Recommend
Exactly what I needed
5.0
5 years ago
Grizzly
Florida
Verified
Fit and performance right on
Would Recommend
I would but the product again
5.0
5 years ago
Ron
Whitewater ,ca,
Verified
Makes my 23 T bucket cool
Would Recommend
I do not know if I would buy again
4.0
6 years ago
Rick
Elk Grove CA
Verified
I used them on my 1946 chevy.
Would Recommend
Showing 10 of 28 reviews
1 Question • 1 Answer
Would these be compatible with the tall finned covers 91017115 on a pre-86 SBC?
by Auzz
• 12 years ago
1 answer
View Answer
1 of 1 questions shown
