|
#13560
Carburetor Stud Kit, 1-3/8 Inch
- Easy installation/removal of carb plates
- Includes zinc plated steel studs, nuts and washers
$9.89
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, 1.375" Overall Length, Steel
- Easy installation/removal of carb plates
- Includes zinc plated steel studs, nuts and washers
Key Specs
| MFG. Part # | 13560 |
| Overall Length | 1.375" |
| Thread Pitch | 5/16"-18 |
| Material Type | Steel |
| Finish | Zinc Plated |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 13560 Details
Speedway Motors 13560 Details
Caburetor Stud Kit, 1 3/8"
Easy installation/removal of carb plates. Includes zinc plated steel studs, nuts and washers.
Speedway Motors 13560 Specifications
Speedway Motors 13560 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 13560 |
| Brand | Speedway Motors |
| Overall Length | 1.375" |
| Thread Pitch | 5/16"-18 |
| Material Type | Steel |
| Finish | Zinc Plated |
| GENERAL | |
| Thread Length | 0.3125" |
| Thread Pitch (2) | 5/16"-24 |
| Thread Length (2) | 0.5625" |
Ratings & Reviews
4.8
43 Reviews
Our product displays commendable qualities, with customers praising its quality, practicality, and solid performance. Many users confirm the high-grade materials in our product, adding to its overall durability. It presents notable usability, fitting as it should and functioning efficiently. It stands out for its safety, guarding against damage to the threads when used with different carb types. An improvement over bolts, our product received numerous recommendations for its reliability, value, and perfect fit. There were a few mentions of the product requiring some cleanup but it was overall a recommended choice over competitor products.
Ratings & Reviews
4.8
43 Reviews
Our product displays commendable qualities, with customers praising its quality, practicality, and solid performance. Many users confirm the high-grade materials in our product, adding to its overall durability. It presents notable usability, fitting as it should and functioning efficiently. It stands out for its safety, guarding against damage to the threads when used with different carb types. An improvement over bolts, our product received numerous recommendations for its reliability, value, and perfect fit. There were a few mentions of the product requiring some cleanup but it was overall a recommended choice over competitor products.
4.8
43 reviews
5
39
4
2
3
0
2
2
1
0
Most Liked Positive Review
5.0
Worked just fine
I am so glad I read the questions about another part I ordered. If not, I would have missed the fact that these were needed to use a carb riser I was going to buy. The tech from Speedway mentioned them and they were the right bolts I needed.
Most Liked Negative Review
2.0
Cut with a cutoff wheel
Looks like it was cut with a cutoff wheel. Had to clean up the threads
Filter by Ratings
Great carb studs!
5.0
26 days ago
Scooter
Wv
Verified
Just what I needed for my 4412 Holley for my dirt modified!
Would Recommend
Yes
5.0
2 months ago
Doug
Hemingford Nebraska
Verified
Everything is great!
Would Recommend
Yes
5.0
9 months ago
Amigo
Oklahoma
Verified
Use when installing new carb
Would Recommend
i would buy again
5.0
9 months ago
sam
ind.
Verified
product worked as described
Would Recommend
I would buy again
5.0
a year ago
Rat rod
Omaha ne
Verified
SBC 350
Would Recommend
yes
5.0
a year ago
Charlie
Colorado Springs
Verified
installed easy
Would Recommend
It's the last carberrator I'll need for the rest of my life!
5.0
2 years ago
S. Coupe
Ont. Can.
Verified
It's perfectly matched to the size motor I have !
Would Recommend
Very good stud kit
5.0
2 years ago
Fireball3553
Dubuque, Iowa
Verified
This stud kit is the exact length I needed for Edelbrock carb I bought from Speedway.
Would Recommend
VERY GOOD PRODUCT.
5.0
3 years ago
Old moe
VINEMONT ALABAMA
Verified
GREAT PRODUCT
Would Recommend
I would buy it again
5.0
3 years ago
GaryDavid
Canandaigua NY
Verified
Great product
Would Recommend
Showing 10 of 43 reviews
Questions & Answers
2 Questions • 3 Answers
Questions & Answers
2 Questions • 3 Answers
Will this fit 2701 Edelbrock intake and how long are the studs
by Rod
• 8 years ago
2 answers
View Answers
What are the thread lengths and what is the threats per inch[coarse-fine]?
by 3m
• 11 years ago
1 answer
View Answer
2 of 2 questions shown