Black Flag™ Eliminator Aluminum Racing Jack Bolt-On Dirt Wing

• Designed exclusively to mount to our Black Flag™ Eliminator racing jack (sold separately)
• Provides a wide, stable surface to use the floor jack on dirt or other soft surfaces
• Made from laser cut and press bent 3/16-inch thick 5052-H32 aluminum sheet
• Simple two bolt installation using existing holes/hardware on the jack itself
• Black anodized finish compliments your Black Flag™ jack and provides protection
• Also available in kit form with large jack saddle and with saddle/dirt wing/floor jack combo

Increase Stability And Ease of Use On Soft Surfaces Like Dirt, Grass, and Gravel

The track surface may be the most critical thing on a racer’s mind come race day, but nearly as important is the surface of your pit space. Your pit space is your home for the day/night or even a whole weekend, and that means repairs and maintenance that must happen on site and must be handled wherever you are told to pit your rig. Most tracks have nothing more than a grassy field or at best pea gravel for you to pit on. Attempting to use an aluminum racing jack, like Speedway Motors’ Black Flag™ Eliminator Low Profile Aluminum Racing Floor Jack can mean an unsafe working environment due to instability of the jack on the soft pit surface. While some may counter the soft surface with a chunk of plywood or other means to spread the load safely, it’s not only another item to safely store in your trailer but something else to grab in a hurry when you need to get the car in the air quickly. Adding a floor jack dirt wing, something often seen on sprint car jack, to your jack provides the same increase in stability without the need to grab any secondary items. Simply slide your dirt wing equipped aluminum racing jack under your race car and get to the business at hand.

Installs Quickly On Your Black Flag™ Eliminator Low Profile Aluminum Racing Jack

Adding our Black Flag™ dirt wing to your Eliminator Low Profile Aluminum Racing Floor Jack is a straightforward process. The aluminum dirt wing hooks over the floor jack’s front axle and is retained under the two forward side handle mounting bolts already in place on your jack. No extra hardware or modifications required to your jack. Our floor jack dirt wing installs in minutes and allows the use of your Eliminator floor jack on both hard and soft surfaces. On hard surfaces the wheels support the load as normal, but when used on a soft surface like dirt or grass the aluminum dirt wing spreads the load of the jack out, increasing the stability of the floor jack and preventing it from sinking into the soft work surface and possibly tipping over.

Made from laser cut and press brake formed 5052-H32 aluminum sheet that is .190-inch (3/16-inch) thick and black anodized for protection and great looks mounted to your Eliminator floor jack, our aluminum dirt wing is a must for racers that work on soft racing pit surfaces. With an overall width of 13 inches the increased stability our floor jack dirt wing offers your Eliminator floor jack is necessary when working on soft surfaces yet won’t get in the way when using your low-profile aluminum racing jack on traditional hard surfaces.

Pair our Black Flag™ floor jack dirt wing with our large racing saddle for even more stability when working in the pits on your race car or pick them both up in our Eliminator floor jack accessory kit. And if you don’t own a Black Flag™ Eliminator Low Profile Aluminum Racing Floor Jack you can score one with our dirt wing and large racing saddle in a pre-packaged kit too!