Bills Hot Rod Co. 200 Series LS Accessory Drive Kit, Short

The all-new redesigned Bills Hot Rod Co. 200 Series LS accessory brackets are the solution to all your LS accessory mounting troubles. A clean-sheet design, developed with the idea to provide a safe and reliable mounting solution for any LS swap configuration you may need for your build. Laser-cut steel brackets with stainless steel hardware to hold up against even the harshest conditions. These Bills Hot Rod Co 200 Series brackets have been combined with accessories, pulleys, and a serpentine belt to form the complete accessory drive solution for your LS engine.

Simple, clean bolt-on design, makes it easy for any DIY gearhead to navigate some of the most complex parts of an LS swap project. These brackets are built on the standard Corvette spacing, with available F-Body or Truck spacing complete accessory drive kits also available.

Utilizes the existing factory threaded bolt holes on your cylinder heads and block, for a true "bolt-on" installation. The automatic belt tensioner assembly takes care of keeping your pulley system tight and operating smoothly - no manual adjustments to worry about after each spirited drive.

Bills Hot Rod 200 Series LS Bracket systems are the ultimate fix to the mysteries of LS accessory routing and mounting - retain that custom look, without having to break the bank with a Bills Hot Rod Co. LS Accessory Drive Solution.

Kit Contents:

Bills Hot Rod Co. 200 Series LS Engine Alt/Power Steering Bracket

• Fits any Gen III/IV LS engine
• Laser-cut steel brackets
• Stainless steel hardware
• True bolt-on installation
• Designed to work alongside existing OE and aftermarket brackets
• Multiple spacing options available for various GM accessories
• Available in raw, chrome, or black powder-coated finish for a true custom look

Bills Hot Rod Co. 200 Series LS Engine A/C Bracket

• Fits any Gen III/IV LS engine
• Laser-cut steel brackets
• Stainless steel hardware
• True bolt-on installation
• Designed to work alongside existing OE and aftermarket brackets
• Multiple spacing options available for various GM accessories
• Available in raw, chrome, or black powder-coated finish for a true custom look

GM CS130D Style High Output 180 Amp Alternator

Speedway Motors alternators are a great addition to your engine, whether it’s for the great look or the reliable high-amperage output. This alternator produces 180 amps, which is a huge jump above stock. It is perfect for vehicles with a lot of accessories and equipment. As this is the style used in most LS-era car applications, it is equipped to take the OEM connection.

Specifications:

• Alternator Style: CS130D
• Maximum Amperage Output: 180 Amps
• Voltage Compatibility: 12 Volts
• One-Wire Capable:  No
• Regulator Style: Internal
• Regulator Included: Yes
• Pulley Included: Yes
• Pulley Style: Serpentine

Chevy LS OE-Style Water Pump, Short

These new water pumps feature all-new, OE-quality components for proper fit and long-life performance. Each pump includes heavy-duty unitized bearings, pressed-on hubs, precision machined housings, unitized seals and optimal impeller clearance, plus all-new water pumps are 100% factory tested to assure the highest quality product. Each unit is built to meet or exceed all Original Equipment specifications and is validated for fit, form, and function. Also, application-specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust.

Dorman 419-379 Automatic Belt Tensioner Assembly, Corvette LS1

This replacement belt tensioner assembly is designed to match the fit and function of the original equipment belt tensioner on specified vehicles. Engineered with quality components for durability, it has been extensively tested to perform reliably.

• Ideal replacement - this drive belt tensioner is a direct replacement for the original tensioner on specified vehicle years, makes and models
• Durable construction - this tensioner assembly is made using quality components to ensure durability and performance
• Cost-effective solution - offers original equipment fit and function at a competitive price
• Quality tested - this part has undergone testing for vehicle fit, corrosion, torque, and spring-back to ensure a quality fit and reliable performance

AC Delco 12568997 Power Steering Pump Pulley, 2005-13 Corvette

• Replacement OE power steering pump pulley by AC Delco.
• Aluminum Construction
• Black Powder Coated
• Sold Each

Dorman 419-610 Smooth LS Idler Pulley, 76mm

Dorman's Belt Tensioner Pulley is engineered to maintain tension on the serpentine belt for the life of the belt--thereby keeping the alternator charging, the water pump running, and the power steering pump and A/C compressor operating properly. They feature a high-quality double-sealed bearing to resist damage from contaminants. Replacement prevents belt slip and eliminates squeak, squeal or groaning noise associated with a worn belt tensioner pulley.

• Steel or plastic construction for long-lasting durability against heat, shock, and corrosion
• Replacement stops squeak, squeal or groaning noise associated with a worn Belt Tensioner Pulley
• Direct replacement for a proper fit every time
• Manufactured to strict engineering quality standards

Chevrolet Performance 12675715 Harmonic Balancer, GM LS3, Short

Chevrolet Performance is the factory source for high-performance parts from power-adding components such as ported cylinder heads and camshafts to virtually everything else you need to build an engine or facilitate an engine swap. There’s no reason to settle for used, reconditioned, or “seasoned” parts because our parts are competitively priced, and you can trust Chevrolet Performance to offer exceptional performance, fit, and durability.

• Originally used on LS3 engines
• For use in 2006-2007 Cadillac CTS-V, 2005-2007 Corvette, and 2008-2009 Pontiac G8 6.0L applications

Gates K06100 Belt for Bills 200 Series LS Accessory Drive w/ AC

These Gates replacement belts are for use with Bills Hot Rod Co. 200 Series LS V8 accessory brackets with A/C.

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates® precision fit Micro-V® belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance. Micro-V belts provide peak operating performance while delivering the highest value on the market.

• Special belt construction eliminates belt noise, reduces tension loss, and solves problem drive applications.
• Utilizes advanced materials like Aramid Fiber found in bullet-proof vests and crack and heat-resistant EPDM materials.
• Meets or exceeds all specifications from the Original Equipment Manufacturer.
• Effective Length (In.) - 100.01"
• Outside Circumference (In.) - 100.58"
• Top Width (In.) - 0.807"
• Top Width (mm) - 20mm

Tuff Stuff GM Type II Remote Reservoir Power Steering Pumps, GM/T-Bird

This high flow style remote reservoir power steering pump can be used with GM power steering or the 1982-1988 Thunderbird power rack and pinion. Must be revalved if used with Mustang II rack and pinion or Ford power steering.

• Available in black or chrome
• Cast aluminum housing
• Compact size
• Same as GM Type II TC pumps
• For use with remote reservoir
• Pulley installation kit included
• Pulley NOT included (use pulley 91032909)

Notes

• 8MM Through Hole Mounting
• Supplied with a 5/8" hose nipple inlet
• Our #10 blue hose (617510-3 or 617510-6) slips on this nipple and seals with a clamp
• Outlet uses a 16mm O-ring fitting
• Our 16MM to #6 adapter (617-4806) fits the outlet and works great as a start point for a -6 pressure line
• Shaft has 0.663" O.D. and uses press-on pulley 910-32909

Bills Hot Rod Co LS Aluminum Power Steering Reservoir w/ Bracket

This aluminum tank will mount on the engine, easing the installation process, and the fabricated style matches Bill's Brackets perfectly.

• Made from fabricated 5052 aluminum alloy which increases strength and durability from factory Corvette design
• Natural fabricated finish provides a great "race look", but this tank is able to be finished to your preference, including painting, powder coating, polishing, or chroming
• Includes reservoir, cap, and bracket

LS Air Conditioner Bracket Installation Instructions (PDF)

LS Alternator & Power Steering Bracket Installation Instructions (PDF)