|
#91606158
Bert LMZ Transmission Kit for 2 Piece Rear Main Seal
- An internal clutch assembly for reduced rotating weight
- New "dog teeth" gears for easier shifting
- Two speed with reverse
$2,903.99
/kit
In Stock
$2,947.39
Save $43.40
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Bert LMZ, 2-Speed Transmission Speeds
- An internal clutch assembly for reduced rotating weight
- New "dog teeth" gears for easier shifting
- Two speed with reverse
- Laser-Cut, CNC-finished flange for a perfect fit
- Does NOT have provision for stock style clutch arm
Comes as a Kit
View Kit Components
Key Specs
| MFG. Part # | 91606158 |
| Brand | Speedway Motors |
| Transmission Speeds | 2-Speed |
| Input Shaft Spline Count | 10 |
| Input Shaft Diameter | 1.0625" |
Need To Know
Need help?
855.313.9176Liquid/Compound Return Policy
For health, safety, and product integrity reasons, only unopened, sealed items are eligible for return or credit.
Return PolicySpeedway Motors 91606158 Details
Speedway Motors 91606158 Details
Bert LMZ Aluminum Transmission
- An internal clutch assembly for reduced rotating weight
- New "dog teeth" gears for easier shifting
- Two speed with reverse
- Direct drive in high gear
- IMCA approved
- Works with standard two-lever shifter
- 2-5/8" shorter than Muncie
NOTE: Shifter NOT included.
Speedway Wissota Chevy/Ford Steel Bellhousing
These steel bellhousings are WISSOTA approved for Midwest Modifieds and work with both small block Chevy and small block Ford engine bolt patterns. They allow for use with Muncie/Saginaw style transmissions.
- SBC and SBF engine bolt patterns
- Laser-Cut, CNC-finished flange for a perfect fit
- Adapts either engine to Muncie/Saginaw pattern transmissions including BERT, Brinn, Falcon, etc.
- Bottom opening for easy access
- Does NOT have provision for stock style clutch arm
- WISSOTA approved for Midwest Modifieds
- Non SFI rated
- NOT for street use
- Must be used with a 153 tooth (Chevy) or 157 tooth (Ford) or smaller flexplate/flywheel
ARP Brinn Flywheel Bolts
- Under Head Length: 1.25"
- Thread Pitch 7/16"-20
- Sold in set of 6
Speedway Motors Braided Stainless AN 4 Brake Line
- Braided stainless covering over a Teflon inner liner
- These are perfect for brake lines, clutch lines and gauge lines
- These have straight AN4 fittings on both ends
B&M Conventional Trick Shift ATF Transmission Fluid
Trick Shift works with all automatic transmissions when a firmer shift is desired (not recommended for electronic controlled transmissions). It can be mixed with stock-type transmission fluids, however, to attain maximum improvement you should use Trick Shift exclusively. Ideal for towing, light trucks, and RV applications as well as racing.
Speedway Motors Bellhousing Bolt Kit
The Speedway Bellhousing Bolt Kit has all necessary hardware to install our steel bellhousing (91027001) to back of your motor.
Includes:
- 6-3/8"-16 x 1-1/4" Grade 5 bolts
- 6-3/8" Grade 5 flat washers
- 6-3/8" Grade 5 lock washers
Brinn Transmission Small Block Chevy Steel Drive Flange, 2 Piece
- Fits 1955-85 engines with 2-piece rear seal crankshaft application
Charts
Speedway Motors 91606158 Specifications
Speedway Motors 91606158 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91606158 |
| Brand | Speedway Motors |
| Transmission Speeds | 2-Speed |
| Input Shaft Spline Count | 10 |
| Input Shaft Diameter | 1.0625" |
| GENERAL | |
| Torque | 600 ft./lbs. |
| Output Shaft Spline Diameter | 1.375" |
| Output Shaft Spline Count | 27 |
| Case Material | Aluminum |
| Bellhousing Included | Yes |
| Yoke Included | No |
| Shifter Included | No |
| Gear Ratio (High) | 1.00:1 |
| Notes | 1-3/8"-10 spline input shaft. 1-3/16"-27 spline output shaft |
| Sold in Quantity | Kit |
| Yoke Style | Slip On |
| Shifter Style | Linkage operated |
Ratings & Reviews
Ratings & Reviews
Questions & Answers
Questions & Answers
Be the first to ask a question.

