BendPak 5175579 RJ45LP 4-Post Lift Rolling Bridge Jack 4.5K Lbs.

The BendPak RJ45LP is a 4,500 lb. low-profile rolling bridge jack for four-post lifts. Its minimum drive-over height of just 4.25" makes it ideal for low-stance sports cars and modified vehicles that cannot clear the standard RJ45W. Easy-roll hardened stainless-steel, zinc-plated wheels fit the runway channels of any four-post lift with 7,000 lb. or greater capacity, gliding effortlessly for precise positioning under the vehicle.

Non-marring rubber contact pads protect vehicle undercarriages and firmly engage lift points. The pneumatic-hydraulic power unit provides controlled lifting for wheel-off service on low-clearance vehicles. Compatible with HD-7, HD-9, and GP-9 series four-post lifts.

• Capacity: 4,500 lbs.; Min drive-over height: 4.25"
• Easy-roll hardened stainless-steel, zinc-plated wheels
• Compatible with HD-7, HD-9, and GP-9 series four-post lifts
• Ideal for low-clearance sports cars and modified vehicles

Low-Profile Design with 4,500 lbs. Full Wheel Service Capability

The RJ45LP rolling bridge jack is ideal for any shop with the HD-7 series or HD-9 series four-post lift model, arguably the most popular and versatile four-post car lifts on the market. Featuring an impressive low-profile design, the RJ45LP lift pads sit just 4.25" from the runway surface and is equipped with easy-to-roll wheels for effortless gliding down the runway track. For those with an HD-7 or HD-9 four-post lift that are in need of wheel service capability, the RJ45LP offers extreme versatility and convenience, in a low-profile package.

 

Low-Profile Bridge Jack

The RJ45LP bridge jack has a minimum drive-over height of just 4.25" when fully lowered. This provides ample clearance for low-stance sports cars and other modified vehicles. 

Easy-Roll Wheels Come Standard

Completely redesigned, the RJ45LP rolling bridge comes standard with easy-roll wheels that fit onto the runway channels on standard four-post lift models ?7,000-lbs lifting capacity or greater and provide effortless gliding along the runways for easy positioning and adjustability. BendPak rolling bridge jack rollers are made of hardened stainless-steel and zinc plated for maximum durability. 

Rubber contact pads

BendPak protects your vehicles by providing a non-marring rubber contact pad on the popular ?RJ45LP rolling bridge jack. The durable design will hold up for many years of heavy use. We highly recommend purchasing the optional frame cradle set for use on trucks and SUVs.

Stackable adapters

Once your rubber contact pads are positioned under the manufacturer-recommended lift points, you may find that high-clearance vehicles are hard to reach. The stackable adapter set comes in handy to bridge that gap and make lifting easier.

High-pressure hydraulic power unit

Attached to the rolling bridge jack is a hydraulic power unit that also features an airline with 125 psi and 10 – 20 CFM. This independent power unit is ergonomically controlled with a foot pedal attached directly to the jack.

Three lock levels

With three lock positions to choose from, it’s easy to find the perfect height to perform wheel and brake service. For additional height, raise the car lift to its max height, add the stackable adapters and raise the rolling bridge jack as high as it will go. Now you have more access to the undercarriage than ever before.