BendPak SP-7XEF 7,000-Lb Capacity Flush-Mount Scissor Lift

The BendPak SP-7XEF is the ultimate flush-mount scissor lift for professional shops and enthusiasts who demand full-rise capability with absolute minimal floor profile. With a 7,000 lb. lifting capacity and a maximum rise of 70.5 inches, this full-rise lift provides exceptional working height and access while remaining virtually invisible when lowered flush with your concrete floor.

When collapsed, you are free to drive over it and work around it without tripping on wires or cables. The SP-7XEF is installed and mounted flush into your flooring without a cross member, making for a true open-center design that provides access to all critical undercarriage areas. Reinforced steel at the base and along the top of the runways eliminates the need for a cross member or additional structural support. The heavy-duty boxed-steel formed base frame increases stability and reduces stress on the overall structure.

Two hydraulic cylinders with flow restrictors ensure an even lift. This dual-cylinder hydraulic design provides extra power and controlled flow sophisticated enough to prevent the risk of tipping — even if one cylinder loses pressure. A single convenient operator stand allows you to release the pneumatic safety locks from a safe distance. The SP-7XEF offers eight distinct locking heights plus full rise, ranging from 24.75" at the first lock position all the way up to 70" at the eighth lock.

• Capacity: 7,000 lbs.; Max rise: 70.5"; Flush-mount design
• 8 locking heights from 24.75" to 70"; drives over when collapsed
• Open-center, no cross member; complete undercarriage access
• Dual hydraulic cylinders with flow restrictors for balanced operation

Concrete cutting specs available — contact dealer for installation guide

Whats Included:

• 1 SP-7XEF Full Rise Lift
• 1 SP-7XEF Parts Box
• Set of 8 Rubber Blocks
• 1 Power Unit
• 1 SP-7XEF Ramp Extension Kit

Product Dimensions:

Height Range:

64.149"

Length Range:

112.657

Width Range:

134.5

Height Overall Comb Units:

64.13" / 1629 mm

Lifting Height Stacked blocks Comb Units:

68" / 1726 mm

Lifting Height With 2 inch block Comb Units:

65.5" / 1662 mm

Lifting Height With 3 inch block Comb Units:

66.5" / 1688 mm

Overall Length Comb Units:

112.63" / 2861 mm

Overall Width Max Comb Units:

134.5" / 3416 mm