|
#9105175399
BendPak 5175399 Two-Post Vehicle Lift 10K Lbs, 168 Inch, Extended
- The expandable top beam accommodates wide or narrow drive thru configuration
- Features a telescoping arm design for more versatile arm positioning
- Has an oversized 53" tall carriage for superior strength and durability
$5,997.99
/each
Factory Shipped
Quantity
Need Help? Call to Order
Add to a list
Product Summary
10,000 lbs. Lifting Capacity, 168.00" Overall Height
- The expandable top beam accommodates wide or narrow drive thru configuration
- Features a telescoping arm design for more versatile arm positioning
- Has an oversized 53" tall carriage for superior strength and durability
- Includes a self lubricating dura glide UHMW polyethylene bearing system
- A 4 piece 63 mm stackable adapter set comes standard
Key Specs
| MFG. Part # | 5175399 |
| Brand | BendPak |
| Lifting Capacity | 10,000 lbs. |
| Overall Height | 168.00" |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyBendPak 5175399 Details
BendPak 5175399 Details
With BendPak's 10,000-lb. capacity XPR-10S-168 increased height and low-profile arms two-post lift in your shop, most cars, trucks and SUVs will be raised quickly and effortlessly. Fully ALI Certified, this model features an extra-high lifting carriage. The taller carriage offers an extra 6" of lift, which means vehicles can be raised a full 80". Taller mechanics will enjoy this feature, since it means they no longer have to bend, stoop, strain and even injure themselves while they spend hour after hour working underneath lifted vehicles.
There's no car lift quite like the XPR-10S-168. This is the symmetrical version (an asymmetrical version is also available), and it's ideal for shops and operators that deal mainly with vehicles whose centers of gravity are toward the center of the car. Of course, trucks and SUVs can be used with this model as well. Some prefer asymmetrical lifts because they allow a little more door clearance, while other prefer vehicles to be positions as close to the center of the lift as possible. There's no right or wrong—the choice is yours!
Features
Capacity
*Max Capacity / Rear Axle -3,500 lbs.
Rise
Outside Dimensions
E - Height Overall: 168"
F - Width Overall: 132" or 168"
G - Outside Columns: 126.75" or 139.75"
Inside Dimensions
H - Inside Columns: 105.5" or 118.5"
I - Drive-Thru Clearance: 93" or 106"
Arms & Pads
K - Front Arm Reach: (MIN) 27.5"
K - Front Arm Reach: (MAX) 51.5"
L - Rear Arm Reach: (MIN) 34"
L - Rear Arm Reach: (MAX) 54.5"
Screw Pad Adjustment: 2"
Max Load Per Arm 2,500 lbs.
Power Unit
Motor: 220 VAC / 60 Hz / 1 Ph
Noise: 45 db
Due to the shipping weight and dimensions of this item, it is required that it be shipped to a business address that will have either a receiving dock or fork lift at the delivery destination to allow for the item to be unloaded from the truck/trailer at the time of delivery.
Charts
Specs
- 10,000 lb. lifting capacity
- Expandable top beam accommodates wide or narrow drive thru configuration
- Double telescoping screw pads offer increased versatility
- Padded overhead safety shutoff bar
- Telescoping arm design for more versatile arm positioning
- Single piece columns
- Single point safety release
- Drop end arms provide a lower pad height
- Dual hydraulic direct drive cylinders
- Oversized 53" tall carriage for superior strength and durability
- Electric / hydraulic power system
- Large, 17" x 19" A36 steel base plate
- Self lubricating dura glide UHMW polyethylene bearing system
- Safety locks in each column spaced every 3"
- Plated arm restraints and arm pins for rust prevention
- Heavy duty 1/2" aircraft quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4 piece 63 mm stackable adapter set comes standard
- Triple telescoping front arms
- ETL Approved
Guides & Documents
Warranty Information
Click for details
Warranty Information
Click for details
BendPak Limited Warranty (PDF)
BendPak 5175399 Specifications
BendPak 5175399 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 5175399 |
| Brand | BendPak |
| Lifting Capacity | 10,000 lbs. |
| Overall Height | 168.00" |
| GENERAL | |
| GTIN Code | 849672004028 |
| Sold in Quantity | Each |
| Floor to Overhead Switch | 141.00" |
| Front Arm Max. Reach | 51.50" |
| Front Arm Min. Reach | 27.50" |
| Rear Arm Max. Reach | 54.50" |
| Rear Arm Min. Reach | 34.00" |
| Min Pad Height | 4.00" |
| Rise | 80.00" |
| Lift Height Max- Pad Only | 73.00" |
| Motor | 220 VAC / 60 Hz / 1 Ph |
| Time to Full Raise | 45.00 seconds |
| Max Load Per Arm | 2500 lbs. |
| Overall Width | 132.00" |
| Height of Columns | 168.00" |
| Max Lifting Height | 80.00" |
Ratings & Reviews
Ratings & Reviews
Questions & Answers
Questions & Answers
Be the first to ask a question.