BendPak 5175164 Four-Post Vehicle Lift 27,000 Lbs, Extended

With 323" runways, the HDS-27X is the first extended-length model in BendPak's super-duty four-post series. As a super-long lift that holds up to 27,000 lbs., this incredibly versatile lift accommodates massive Class 7 semi-trucks. There isn't much this lift can't handle.

Commercial lifting solutions for semi-trucks and other municipal vehicles fall into a category all their own. That's because vehicles reaching the 27,000-lb. lift capacity begin to develop monstrous proportions. The super-long HDS27X handles stretch limos, semi-trucks, city buses and other super-duty vehicles. In fact, 27,000 lbs. should handle a typical garbage truck without a hitch. The best part of being in the heavy-duty maintenance industry is that your competition is relatively low. Most auto shops veer away from servicing commercial fleets. They require specialized equipment (which BendPak makes easy to obtain) and more shop space, which you probably already have covered! If you want to dominate your industry with a reliable commercial fleet of lifts, you'll absolutely need the incredible HDS27X.

• 27,000-lb. lifting capacity
• CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
• Supersized 12" diameter cable sheaves
• Galvanized lifting cables
• Grease nipples
• Single hydraulic under-runway cylinder
• Integrated flow restrictor
• Durable powder coat
• Spring-loaded safety locks
• Second lock system on constant guard
• Fully enclosed lifting cables
• Multiple adjustable height locking positions
• Maintenance-free electric hydraulic power system
• Conveniently positioned operator controls
• 12" x 12" base plates
• Non-skid runways

Due to the shipping weight and dimensions of this item, it is required that it be shipped to a business address that will have either a receiving dock or fork lift at the delivery destination to allow for the item to be unloaded from the truck/trailer at the time of delivery.

BendPak Four-Post Vehicle Lift Installation and Operation Manual (PDF)

BendPak Delivery Requirements (PDF)

BendPak Delivery Information (PDF)

Capacity

Lifting Capacity* - 27,000 lbs.

*Max Capacity / Front Axle - 13,500 lbs.

*Max Capacity / Rear Axle - 13,500 lbs.

Rise

A - Min. Runway Height: - 8.5”

B - Max. Rise: - 60” 

C - Max. Lifting Height: - 68.5” 

Time to Full Rise: - 75 seconds

Outside Dimensions

D - Overall Width: - 154” 

E - Outside Length: - 317”

F - Overall Length: - 357” 

G - Height of Columns: - 93” 

Inside Dimensions

H - Width Between Columns: - 134” 

I - Drive-Thru Clearance: - 109” 

Runways

J - Runway Width: - 22” 

K - Length of Runways: - 323” 

L - Width Between Runways: - 38” or 56”

M - Runway Centerline: - 60” or 78”

N - Outside Edge of Runways: - 82” or 100” 

Minimum Wheelbase

Rated Capacity: - 230”

75% Capacity: - 195”

50% Capacity: - 165”

25% Capacity: - 130”

Locking

Locking Positions: - 9

Lock Spacing: - Every 6”

Power Unit

Motor: - 220 VAC / 60 Hz / 1 Ph

Noise: - 45 dB

BendPak Limited Warranty (PDF)