BendPak's HD-7W is the standard-width car lift model in the HD-7 series. With a 110.25” overall width and a spacious 100.25” spread between the columns, there’s plenty of room to park most cars and trucks in the lower position. This leaves ample space for you to maneuver.

7,000-lb. maximum lifting capacity
Wide drive-thru with tall lifting height and short runways
Runways include rail-kit for optional accessories
Electric / hydraulic power system
Single hydraulic cylinder mounted underneath runway
Internal anti-sway slider blocks in each column
Oversized self-lubricating cable rollers
Features heavy-duty 3/8" aircraft cable
Rugged 1.25" roller axles
Multi-position safety locks in each column
Adjustable lock ladders
Ramps feature non-skid surface
Push-button pneumatic safety release

Due to the shipping weight and dimensions of this item, it is required that it be shipped to a business address that will have either a receiving dock or fork lift at the delivery destination to allow for the item to be unloaded from the truck/trailer at the time of delivery.

Charts

BendPak Four-Post Vehicle Lift Installation and Operation Manual (PDF)

BendPak Delivery Requirements (PDF)

BendPak Delivery Information (PDF)

Specs

Capacity

Lifting Capacity* 7,000 lbs. (3,175 kg)

*Max Capacity / Front Axle 3,500 lbs. (1,588 kg)

*Max Capacity / Rear Axle 3,500 lbs. (1,588 kg)

Rise

A - Min. Runway Height: 435" (11,049 mm)

B - Max. Rise: 82" (2,083 mm)

C - Max. Lifting Height: 86.5" (2,197 mm)

Time to Full Rise: 35 seconds

Outside Dimensions

D - Overall Width: 110.25" (2,800 mm)

E - Outside Length: 174" (4,420 mm)

F - Overall Length: 200" (5,080 mm)

G - Height of Columns: 100" (2,540 mm)

Inside Dimensions

H - Width Between Columns: 100.25" (2,546 mm)

I - Drive-Thru Clearance: 86.5" (2,197 mm)

Runways

J - Runway Width: 19" (483 mm)

K - Length of Runways: 164" (4,166 mm)

L - Width Between Runways: 37.5" (953 mm) or 44.375" (1,127 mm)

M - Runway Centerline: 56.5" (1,435 mm) or 63.375" (1,610 mm)

N - Outside Edge of Runways: 75.5" (1,918 mm) or 82.375" (2,092 mm)

Minimum Wheelbase

Rated Capacity: 115" (2,921 mm)

75% Capacity: 100" (2,540 mm)

50% Capacity: 85" (2,159 mm)

25% Capacity: 70" (1,778 mm)

Locking

Locking Positions: 15

Lock Spacing: Every 4" (102 mm)

Power Unit

Motor: 220 VAC / 60 Hz / 1 Ph

Noise: 45 dB

Guides & Documents

Automotive Lifts Installation Instructions (9105175120)

Technical Information (BendPak)

Warranty Information

Click for details

BendPak Limited Warranty (PDF)

CA Prop 65

BendPak 5175120 Specifications

KEY SPECS
MFG. Part #	5175120
Brand	BendPak
Lifting Capacity	7,000 lbs.
Overall Height	100.00"

GENERAL
GTIN Code	00849672001041
Sold in Quantity	Each
Motor	220 VAC / 60 Hz / 1 Ph
Time to Full Raise	35.00 seconds
Overall Width	110.25"
Overall Length	200.00"
Outside Length	174.00"
Height of Columns	100.00"
Length of Runways	164.00"
Runway Min Height	4.50"
Runway Width	19.00"
Width Between Runways	37.50"
Max Lifting Height	86.50"
Width Between Posts	100.25"
Min. Wheelbase (25% Capacity)	70.00"
Min. Wheelbase (50% Capacity)	85.00"
Min. Wheelbase (75% Capacity)	100.00"
Min. Wheelbase (Rated Capacity)	115.00"
Locking Positions	15.00
Lock Spacing	4.00"

Ratings & Reviews

Be the first to write a review.

Questions & Answers

Be the first to ask a question.