|
#2531510
$65.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 15.5" Flange Diameter, Steel
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThis bead lock kit welds to 15" steel wheel. One piece steel ring with attached threaded inserts. Complete with mounting hardware and 3/16" thick weld-on steel ring. All threaded nuts come pre-attached. Winners use these on both the inside and the outside!
Charts
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 2531510 |
| Brand | Speedway Motors |
| Material Type | Steel |
| GENERAL | |
| Flange Diameter | 15.5" |
| Flange Thickness | 0.1875" |
| Flange Width | 1.250" |
| Finish | Powder Coated |
| Sold in Quantity | Each |
| Notes | Includes 5/16"-18 x 1" bolts. |
4.3
18 Reviews
Customers praise the product for its affordability and lightweight design, and commend it as a cost-effective alternative to more expensive bead lock rims. Many found it easy to install and fit to their wheels, appreciating its simplicity and functionality. However, some customers noted the thinness of the rings, suggesting they may be weaker and prone to bending. The product is recommended for low-pressure usage, such early stage race car or snow wheeling applications. The conclusion is this product excels amongst DIYers, skilled welders, and those looking for cost-effective, lightweight alternatives.
4.3
18 reviews
5
10
4
5
3
2
2
1
1
0
Most Liked Positive Review
4.0
Works for what I needed
I'm not using them for what they were intended. I'm using them for low pressure snow wheeling. 1 to 5 psi. They have a rolled head on the lock ring. The only type like this I have found. Cons- thin lockring, only 16 bolts. I drill them out to 32. The rolled ring does not cut the bead of the tire. Maybe some day they will make them 32 and thicker!
Most Liked Negative Review
3.0
They're ok, could be better.
They are good and bad.. lol Them being thinner is nice because they are lightweight but on the other hand they are weaker. The outer rings bend just putting the bolts in, they are holding the thick bead of Boggers and TSL's so maybe better with others. Have had a few nutserts come loose, would highly advise tack welding them before installing. Have had them for 3 years so far and only replaced one outer ring. I wheel mostly in woods, ravines, and mud no real rocks.
Filter by Ratings
These kits are the best bang for the price.
5.0
10 months ago
Scott87
Omaha ne
Verified
I've used these kits several times now on various projects, they are user friendly and very easy to install. They are the best DIY kit on the market for the price they are at. The parts are machined well and the tolerances are perfect. Will happily continue to use these on future projects!!
Would Recommend
Will definitely buy again
5.0
a year ago
Adam
Johnstown, Pennsylvania
Verified
Product works perfect.
Would Recommend
I will purchase again
5.0
2 years ago
Jughead
Whitesburg KY
Verified
Used to fab my own bead lock rims works fine
Would Recommend
Yes
5.0
2 years ago
Jared Dysart
North Carolina
Verified
Works perfectly
Would Recommend
I would buy again, fitment was good worked like it should
5.0
2 years ago
Nick
Soddy Daisy Tn
Used this for my dirt track car
Would Recommend
Thin metal
2.0
4 years ago
Racer
Kansas
Doesn't have near the strength of a traditional beadlock ring on a Basset or Aero wheel for instance. Save your money and buy something else.
Would Not Recommend
I would by again
5.0
4 years ago
Pete
Benton
Verified
The rings are thicker and better for welding to the wheel
Would Recommend
I would buy this product again.
5.0
7 years ago
Leighanne
Cullman AL
Verified
Cheaper than buying a beadlock rim and works the same.
Would Recommend
They're ok, could be better.
3.0
7 years ago
ThatOneGuy
Illinois
They are good and bad.. lol Them being thinner is nice because they are lightweight but on the other hand they are weaker. The outer rings bend just putting the bolts in, they are holding the thick bead of Boggers and TSL's so maybe better with others. Have had a few nutserts come loose, would highly advise tack welding them before installing. Have had them for 3 years so far and only replaced one outer ring. I wheel mostly in woods, ravines, and mud no real rocks.
Would Recommend
Good product for the price
4.0
8 years ago
AndRoo
Australia
Verified
Good quality and east to fit. Less bolts than the more expensive ones but that may not make a difference.
Would Recommend
Showing 10 of 18 reviews
5 Questions • 5 Answers
Does this add any width to the wheel?
by Tyler
• 9 years ago
1 answer
View Answer
do stems come included?
by Justin
• 9 years ago
1 answer
View Answer
Will any outter ring fit the inner ring bolt pattern or does it have to be a speedway brand? Reason i ask is i tried a aero outter ring and the bolt pattern is off not sure if its a miss aligned inner ring you guys sold me or what.. thanks
by Big B
• 9 years ago
1 answer
View Answer
how many rings are in this kit?
by RonV88
• 12 years ago
1 answer
View Answer
will this kit convert any steel 15" wheel to a true beadlock wheel?
by
• 15 years ago
1 answer
View Answer
5 of 5 questions shown
