-11%
-11%
|
#5504580
Baby Moon Hub Caps for O/E Style Wheels, 10-1/8 Inch Diameter
- These chrome 10-1/8" Diameter Baby Moons are old school cool
- They perfectly compliment the Speedway Motors O/E Style Hot Rod steel wheels
- Will not fit "Smoothie" or "Rally" type wheels
$105.95
/set
In Stock
$119.95
Save $14.00
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, 10.13" Overall Diameter, Steel, Chrome
- These chrome 10-1/8" Diameter Baby Moons are old school cool
- They perfectly compliment the Speedway Motors O/E Style Hot Rod steel wheels
- Will not fit "Smoothie" or "Rally" type wheels
- Specifically designed to fit and only work directly with the Speedway Motors O/E Style Hot Rod Wheels
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyMr Gasket 5504580 Details
Mr Gasket 5504580 Details
These chrome 10-1/8" Diameter Baby Moons are old school cool. They perfectly compliment the Speedway Motors O/E Style Hot Rod steel wheels.
- Made for 10-1/8" "outside nub" wheels
- Chrome plated steel
- Set of 4
- Will not fit "Smoothie" or "Rally" type wheels
- Specifically designed to fit and only work directly with the Speedway Motors O/E Style Hot Rod Style Wheels
Installation Note: The fitment of this cap at the 3 retention points is very tight to maximize retention. Start the cap over 2 of 3 retention points and then apply gentle pressure to tap/push the outside part of the cap over the 3rd point. The cap will then snap in place using this method for most install applications.
Cap snaps over the three or four 'external' bumps that surround the center part of the stock-style wheels.
Application
Will fit the Speedway Motors O.E. style HotRod wheels, as well as the following stock wheels:
- most 1949-up Ford cars
- most 1965-up Ford pickups
- most 1954-up Chevy cars
- most 1960-up Chevy/GMC trucks as well as many other GM cars from the mid '60's on.
Note: This cap will not fit most wheels from the Dodge/Plymouth/Chrysler car/truck application.
Specs
- Measure approximately 10-/8" i/d
- Measure approximately 2-7/8" from back-to-front or 'dome height'
Mr Gasket 5504580 Specifications
Mr Gasket 5504580 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 5504580 |
| Brand | Mr Gasket |
| Material Type | Steel |
| Finish | Chrome |
| GENERAL | |
| Overall Diameter | 10.13" |
| Sold in Quantity | Set |
Ratings & Reviews
4
24 Reviews
The product received largely positive reviews for its vintage, "old school" aesthetic and its ability to enhance the look of numerous different vehicle models, particularly older ones such as the '56 Chevy and '39 Ford. Users appreciated its reasonable price, fit, and nice finish while regrettably a few found the material a bit thin and prone to denting during installation. The product helped achieve a nostalgic look transforming many vehicles, though compatibility issues were reported with certain models, especially Speedway OE wheels. Overall, majority of customers found value in the product and would purchase again.
Ratings & Reviews
4
24 Reviews
The product received largely positive reviews for its vintage, "old school" aesthetic and its ability to enhance the look of numerous different vehicle models, particularly older ones such as the '56 Chevy and '39 Ford. Users appreciated its reasonable price, fit, and nice finish while regrettably a few found the material a bit thin and prone to denting during installation. The product helped achieve a nostalgic look transforming many vehicles, though compatibility issues were reported with certain models, especially Speedway OE wheels. Overall, majority of customers found value in the product and would purchase again.
4
24 reviews
5
16
4
2
3
1
2
0
1
5
Most Liked Positive Review
5.0
All good. Comments on fitting.
Exactly the thickness of metal I expected. Some people have mentioned denting theirs while installing. I've had tight sets in the past and you need to use both hands near the edge to spread the force out a bit and then all is good. These sets I just purchased are actually not quite tight enough for HK-T-G Holden wheels. They clip on just a little too easily so you need to add a little weld to the mounting 'nubs' on the actual wheels to feel more secure.
Most Liked Negative Review
1.0
Undersized
I understand these baby moons are entry level and made overseas. The first thing out of the box , I could see the variation in chrome thickness and the shine was poor at best. Ok, it's an old truck let's use them anyway. But now they are undersize and won't fit over the OE Chevy wheel outside nubs without distortion beyond normal. Oh well, they need to go back...
Filter by Ratings
Fit perfectly
5.0
9 months ago
Steve
Baldwin, georgia
Verified
They fit well and finish is perfect.
Great product and price
5.0
10 months ago
Tom
North Carolina
Verified
Shipped fast and looks great
Would Recommend
Just what I needed
5.0
3 years ago
MEB
San Tan Valley AZ
Verified
Look well made have the old school look
Would Recommend
Fit and look great
5.0
3 years ago
I'm Paul
Lucedale, MS
Verified
These fit the factory 15" steel wheels on my C10 perfectly. Nice finish and seen to be thick enough they don't bend when trying to install.
Would Recommend
Baby moons
5.0
4 years ago
Big Al
Solon, Ohio
Verified
They fit a little tight but once on we're great
Would Recommend
Not necessary.
5.0
4 years ago
Pete
Punta Gorda, FL
Verified
They fit perfectly and look great!
Would Recommend
Good value
5.0
4 years ago
SteveB
Preston,CT
Verified
installed them on brand new steel wheels on my 1939 Ford Deluxe
Would Recommend
Great product. Just as advertised.
5.0
4 years ago
Steve
San Diego
Verified
They look great on my 56 Chevy!
Would Recommend
Look great with my beauty rings.
5.0
4 years ago
Scotty-Bob
Snellville, GA.
Verified
They improve the looks of my rusty pickup.
Would Recommend
meet ol baby moons
5.0
4 years ago
art tha barber
tracy ca
Verified
fits my 46 ford steelies w/ added beautys ring at a reasonable price.fast delivery
Would Recommend
Showing 10 of 24 reviews