-8%
-8%
|
#5504580
$109.95
/set
In Stock
$119.95
Save $10.00
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 10.13" Overall Diameter, Steel, Chrome
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThese chrome 10-1/8" Diameter Baby Moons are old school cool. They perfectly compliment the Speedway Motors O/E Style Hot Rod steel wheels.
Installation Note: The fitment of this cap at the 3 retention points is very tight to maximize retention. Start the cap over 2 of 3 retention points and then apply gentle pressure to tap/push the outside part of the cap over the 3rd point. The cap will then snap in place using this method for most install applications.
Cap snaps over the three or four 'external' bumps that surround the center part of the stock-style wheels.
Application
Will fit the Speedway Motors O.E. style HotRod wheels, as well as the following stock wheels:
Note: This cap will not fit most wheels from the Dodge/Plymouth/Chrysler car/truck application.
Specs
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 5504580 |
| Brand | Mr Gasket |
| Material Type | Steel |
| Finish | Chrome |
| GENERAL | |
| Overall Diameter | 10.13" |
| Sold in Quantity | Set |
4
25 Reviews
The product received largely positive reviews for its vintage, "old school" aesthetic and its ability to enhance the look of numerous different vehicle models, particularly older ones such as the '56 Chevy and '39 Ford. Users appreciated its reasonable price, fit, and nice finish while regrettably a few found the material a bit thin and prone to denting during installation. The product helped achieve a nostalgic look transforming many vehicles, though compatibility issues were reported with certain models, especially Speedway OE wheels. Overall, majority of customers found value in the product and would purchase again.
4
25 reviews
5
16
4
2
3
2
2
0
1
5
Most Liked Positive Review
5.0
All good. Comments on fitting.
Exactly the thickness of metal I expected. Some people have mentioned denting theirs while installing. I've had tight sets in the past and you need to use both hands near the edge to spread the force out a bit and then all is good. These sets I just purchased are actually not quite tight enough for HK-T-G Holden wheels. They clip on just a little too easily so you need to add a little weld to the mounting 'nubs' on the actual wheels to feel more secure.
Most Liked Negative Review
1.0
Undersized
I understand these baby moons are entry level and made overseas. The first thing out of the box , I could see the variation in chrome thickness and the shine was poor at best. Ok, it's an old truck let's use them anyway. But now they are undersize and won't fit over the OE Chevy wheel outside nubs without distortion beyond normal. Oh well, they need to go back...
Filter by Ratings
Thin material
3.0
4 months ago
Brad
Kansas
Verified
Look good but are easily dented when installing. I remember being able to use a soft rubber mallet to make it easier to install. You can't do that with these because they dent so easy. That leaves using the palm of your hand which is difficult with 70 year old joints. I'll look at another manufacturer for replacements.
Would Not Recommend
Fit perfectly
5.0
a year ago
Steve
Baldwin, georgia
Verified
They fit well and finish is perfect.
Great product and price
5.0
a year ago
Tom
North Carolina
Verified
Shipped fast and looks great
Would Recommend
Just what I needed
5.0
3 years ago
MEB
San Tan Valley AZ
Verified
Look well made have the old school look
Would Recommend
Fit and look great
5.0
4 years ago
I'm Paul
Lucedale, MS
Verified
These fit the factory 15" steel wheels on my C10 perfectly. Nice finish and seen to be thick enough they don't bend when trying to install.
Would Recommend
Baby moons
5.0
4 years ago
Big Al
Solon, Ohio
Verified
They fit a little tight but once on we're great
Would Recommend
Not necessary.
5.0
4 years ago
Pete
Punta Gorda, FL
Verified
They fit perfectly and look great!
Would Recommend
Good value
5.0
5 years ago
SteveB
Preston,CT
Verified
installed them on brand new steel wheels on my 1939 Ford Deluxe
Would Recommend
Great product. Just as advertised.
5.0
5 years ago
Steve
San Diego
Verified
They look great on my 56 Chevy!
Would Recommend
Look great with my beauty rings.
5.0
5 years ago
Scotty-Bob
Snellville, GA.
Verified
They improve the looks of my rusty pickup.
Would Recommend
Showing 10 of 25 reviews
8 Questions • 8 Answers
Need to clear the axle on old style ford rear which sticks out approx 3 inches. Is there a deeper 10 1/8 moon that will fit over axle ends? 15x5.5 f100 wheels on 1947 ford
by Steve
• 9 years ago
1 answer
View Answer
I have after market multiple hole steel rims from ecklers for a 58 impala. needed these to change to disc brakes. will your product fit this? Bob
by fudge
• 10 years ago
1 answer
View Answer
This hubcaps fit on my 15x7 inch steel smoothie wheels
by Goh
• 11 years ago
1 answer
View Answer
Will these caps fit 14" mustang wheel?
by Bob
• 11 years ago
1 answer
View Answer
hub cap installation I bought these when I bought my T bucket kit. Finally got close enough to install them on your O/E style wheel and they will not fit. Way to tight. There is no way to get them on without denting them. Did I just get a bad set, or are they all Mfg wrong? Can you find me a set that will fit? Thanks Bill
by Bill13579
• 11 years ago
1 answer
View Answer
wil these caps fit stock 49-50 ford 15 inch wheels?
by mattthompson
• 11 years ago
1 answer
View Answer
will these fit 14" steelies of a toyota, not familiar with "smooth" or "rally" wheels..... its a 1994 toyota pick
by yeahDezi
• 11 years ago
1 answer
View Answer
how do you put them on without putting dents in them
by sassyy
• 13 years ago
1 answer
View Answer
8 of 8 questions shown
