|
#1822268
AutoMeter 2268 LS Series Oil Press. Sender Adapter
- Constructed from solid brass
- It includes a new crush washer for a leak free fit
- Hex on this adapter requires a 7/8" wrench or socket
$18.49
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Product Summary
Universal Fit
- Constructed from solid brass
- It includes a new crush washer for a leak free fit
- Hex on this adapter requires a 7/8" wrench or socket
- Adapter is 16 mm long and goes from 1.5 Male to 1/8" Female
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyAutoMeter 2268 Details
AutoMeter 2268 Details
As featured on Classic Truck’s Week to Wicked. Watch the transformation here!
This LS Series oil pressure sender fitting allows your aftermarket 1/8" NPT oil pressure sending unit to be installed in place of the OEM oil pressure sender.
When installing aftermarket gauges, the OEM oil pressure sender is not required by the PCM and may be replaced by the aftermarket sender of your choice.
Item Details
16mm-1.5 Male to 1/8" FemaleApplication
This adapter works with all LS Series motors:
- LS1
- LS2
- LS3
- LS6
- LS7
Charts
Guides & Documents
AutoMeter 2268 Specifications
AutoMeter 2268 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 2268 |
| Brand | AutoMeter |
| GENERAL | |
| Notes | Includes crush washer. |
| GTIN Code | 046074022685 |
| Sold in Quantity | Each |
Ratings & Reviews
4.9
16 Reviews
Customers praised the LS oil pressure sending fitting for its quality and practicality. Users found it perfect for LS engine swaps and conversions, enabling manual oil pressure checks and the connection of aftermarket oil pressure gauges. The material quality and fit were consistently commended, with users noting easy installation, clear instructions, and compatibility with various LS engines. Customers confirm its usability and recommend for those looking to adapt oil sensors for LS engines.
Ratings & Reviews
4.9
16 Reviews
Customers praised the LS oil pressure sending fitting for its quality and practicality. Users found it perfect for LS engine swaps and conversions, enabling manual oil pressure checks and the connection of aftermarket oil pressure gauges. The material quality and fit were consistently commended, with users noting easy installation, clear instructions, and compatibility with various LS engines. Customers confirm its usability and recommend for those looking to adapt oil sensors for LS engines.
4.9
16 reviews
5
15
4
1
3
0
2
0
1
0
Filter by Ratings
fits perfect
5.0
4 months ago
steph
basco , il
Verified
fits perfect
Would Recommend
YES
5.0
3 years ago
Garry Moores
Lubec, Maine
Verified
OIL PRESSURE SENDING FITTING TO OIOL GAUGE.
Would Recommend
great product i would buy it again
5.0
6 years ago
Tim
Bellwood, NE
Verified
its a speciality product that is needed when converting a LS to manual oil pressure
Would Recommend
I WOULD BUY AGAIN IF NEEDED
5.0
6 years ago
mike71ride
Campobello SC
Verified
PRODUCT FIT GREAT AND WAS GOOD QUALITY
Would Recommend
Adapter fit perfectly and worked well.
5.0
7 years ago
Fred
Cleveland Ohio
Verified
Used to check oil pressure to confirm pressure switch was defective.
Would Recommend
Worked perfect for my swap
5.0
8 years ago
Chris
PA
Verified
Works perfect to adapt aftermarket oil psi sending unit to LS motor.
Would Recommend
Yes I did buy this product again
5.0
8 years ago
Racerno60
WA - Washington
Verified
put it in my LS engine lm7 bolted right in.bolted my oil line just like a normal Chev worked out great
Would Recommend
Would buy again
4.0
8 years ago
Jeff
Marshfield, WI
Verified
Works as intended
Would Recommend
I recommend this product to everyone works perfectly
5.0
8 years ago
Owens
Hannibal mo
Verified
I used this product for an adaptor on my oil sensor for my ls1 engine
I would buy this product again
5.0
8 years ago
Robert Ballard
Bessemer city
Verified
Helped with my LS2 swap in my 55 chevy
Would Recommend
Showing 10 of 16 reviews