AutoMeter 1403 Designer Black Air-Core 2 Piece Gauge Kit, 5 Inch
Universal Fit, Analog Gauge Series, Electric Gauge Style, Quad Gauge Set Design, Black, Chrome
- Traditional incandescent lighting illuminates around the perimeter of the dial
- Kit includes fuel level sender (240E/33F), oil pressure sender, water temperature sender, 2-wire hall-effect speed sender that is compatible with GM/Chrysler applications (7/8" - 18THD), sending unit adapters (1/4", 3/8”, and 1/2" NPT adapters), bulb and socket assemblies, red and green bulb covers, mounting hardware, and detailed instructions for installation.
- AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
- 12 and 16 volt compatible, compatible with nearly every street car or race car electrical system
- Speedometer has a simple push button, 2 mile drive calibration. No dip switches and can be reprogramed at any time to accommodate changes in gear ratio or wheel and tire combination.
When you’re ready to install instrumentation in your high-performance vehicle, don’t settle for slow and inaccurate factory equipment. Auto Meter's Designer Black Series Gauge Kit features their famous high performance movements and is designed for a seamless dashboard mount for the ultimate driver information center. These 5" Designer Black Series Quad Gauges feature chrome bezels and the programmable speedometer allows you to compensate for tire size and gear ratio with a push of a button.
- Advanced 90 degree air core movements
- Programmable speedometer can compensate for tire size and gear ratio at the push of a button
- Electric sending units keep hazardous fluids in the engine compartment
- Sends collected data via an electrical signal to quick reacting, precise air core movements
- Gives you all the information that you need and nothing that you don’t
- Gauges fit in a 4-5/8" hole
- Trim ring O.D. is 4-15/16"
- Range: 100 PSI / 100-250 deg. F / 8-18 Volts / 240ΩE/33ΩF
- 1/8" NPT Sender
- 1/4" NPT adapter/fitting
- 3/8" NPT adapter/fitting
- 1/2" NPT adapter/fitting
Gauge set includes all senders (see Notes tab).
Ships with the following AutoMeter products:
Sending Unit(s): Fuel Sender 3262 - Oil Sender 2242 - Water Sender 2258 - VSS Sensor
Adapters/Fittings: 1/8" NPT Male to 1/8" compression fitting, 1/8" NPT Female to 1/8" compression fitting, 1/8" NPT to 1/4" NPT bushing, 3/8" NPT and 1/2" NPT adapter fittings.
Bulb & Socket: 3212
Light Covers: Red 3214 & Green 3215
Mounting Hardware: Brackets Included
Included Adapter/Fitting1/8" NPT Male to 1/8" compression fitting, 1/8" NPT Female to 1/8" compression fitting, 1/8" NPT to 1/4" NPT bushing, 3/8" NPT and 1/2" NPT adapter fittings.
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
More Like This
AutoMeter 1419 Designer Black Air-Core Quad Gauge, 5 Inch
AutoMeter 1409 Designer Black Air-Core 2 Piece Gauge Kit, 3-3/8
AutoMeter 1410 Designer Black Air-Core Quad Gauge, 5 Inch
AutoMeter 1412 Designer Black Air-Core Quad Gauge, 3-3/8 Inch
AutoMeter 1413 Designer Black Air-Core Dual Gauge, 3-3/8 Inch
AutoMeter 1421 Designer Black 5 Piece Electric Gauge Kit
AutoMeter 1434 Designer Black Air-Core Dual Gauge, 3-3/8 Inch
AutoMeter 1450 Designer Black 5 Piece GPS Gauge Kit
AutoMeter 1603 Old-Tyme White Air-Core 2 Piece Gauge Kit, 5 Inch
AutoMeter 1414 Designer Black Air-Core Quad Gauge, 3-3/8 Inch
Q & A
Darrian explains how to program the Omega Kustom 3-N-1 Gauge in the third and final video of the series.
Check out the second video on how to program Omega Kustom Gauges!
Speedway Motors product expert Pat shows off some of our CNC billet aluminum pieces available for your late 60's Chevy or Ford truck.
Speedway Motors employee Pat joins us once again. This time Pat is talking to the Model A and Model T owners, specifically in regards to Moto-Meters and accessories.