|
#91734465
Aluminum Radiator Weld-On Inlet/Outlet Neck Kit w/ Petcock
- Rebuild your aluminum radiator
- Includes a 1 1/2" and 1 3/4" neck, weld-in 1/4" NPT fitting, hose barb and petcock
- Fabrication and aluminum welding required
$26.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, Aluminum, 1.5" Inlet Size
- Rebuild your aluminum radiator
- Includes a 1 1/2" and 1 3/4" neck, weld-in 1/4" NPT fitting, hose barb and petcock
- Fabrication and aluminum welding required
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91734465 Details
Speedway Motors 91734465 Details
These aluminum hose neck kits make it easy to rebuild your aluminum radiator. Includes a 1-1/2" and a 1-3/4" neck, weld-in 1/4" NPT fitting, hose barb and petcock. Fabrication and aluminum welding required.
- 1-3/4" tube = 3" long
- 1-1/2" tube = 2-1/2" long
Speedway Motors 91734465 Specifications
Speedway Motors 91734465 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91734465 |
| Brand | Speedway Motors |
| Material Type | Aluminum |
| GENERAL | |
| Sold in Quantity | Kit |
| Notes | Hose barb is 1/8" NPT. Petcock and bung are 1/4" NPT. |
| Inlet Size | 1.5" |
| Inlet Length | 2.5" |
| Outlet Length | 3" |
Ratings & Reviews
4.7
10 Reviews
The product is highly appreciated for its practicality, superb material quality, and fit. Customers found it perfect for specific radiator alterations in vehicles like a Shelby Cobra, noting its convenience in connecting the radiator hose to the tank bottom for fan clearance. Its aluminium long-lasting parts are well made and straight; they tend to exceed the original's length, providing the needed extra. Recognized for its good weldability, it resolves minor issues efficiently. However, the product lacks availability in 1.75" for inlet and outlet.
Ratings & Reviews
4.7
10 Reviews
The product is highly appreciated for its practicality, superb material quality, and fit. Customers found it perfect for specific radiator alterations in vehicles like a Shelby Cobra, noting its convenience in connecting the radiator hose to the tank bottom for fan clearance. Its aluminium long-lasting parts are well made and straight; they tend to exceed the original's length, providing the needed extra. Recognized for its good weldability, it resolves minor issues efficiently. However, the product lacks availability in 1.75" for inlet and outlet.
4.7
10 reviews
5
8
4
1
3
1
2
0
1
0
Most Liked Positive Review
5.0
Worked great
I just used the tube but it worked great and its nice that its already beaded on one end
Most Liked Negative Review
3.0
Decent product
I bought this because I needed an extra 1 1/2" inlet for a radiator project for my welder, and some material to raise the filler neck which the 1 3/4" tube worked perfect for. I was not able to use the NPT fitting provided, as I was trying to weld it there was a lot of contamination and it blew away while trying to get it to puddle, where the .090 tank body held up fine. I suspect it may have been anodized and I did not clean it well enough, so I ended up machining my own from 6061 bar stock.
Filter by Ratings
extend a neck
5.0
6 days ago
Carl P
Montana
Verified
Nice heavy wall aluminum, easy to weld
Would Recommend
Looks like nice parts
5.0
4 months ago
Greg
Stanwood , Michigan
Verified
I will have these welded in next....hopefully the quality is good.....my welder will let me know for sure.
Would Recommend
Only for a hotrod
5.0
2 years ago
Looking for a cheap fix
Laveen AZ
Verified
Ended up not needing
Would Recommend
This was the exact kit that I was looking for to alterCobra
5.0
4 years ago
Dennis
Oregon
Verified
We are using the radiator ports to build a Shelby Cobra radiator.
Would Recommend
Aluminum radiator outlet
5.0
6 years ago
Wes
Ankeny IA
Verified
Straight and longer then the original. This just what I needed.
Would Recommend
fit like it was made there
5.0
7 years ago
Rick
Booneville MS
Verified
was made well welded up nicely a great fix to a small issue
Worked great
5.0
7 years ago
JJJ
Livermore Ca
Verified
I just used the tube but it worked great and its nice that its already beaded on one end
Would Recommend
good parts .....Exactly what I needed
5.0
7 years ago
Street&Strip
Texas
Verified
give you the option to connect the radiator hose to the bottom of the tank for fan clearance
Would Recommend
Decent product
3.0
10 years ago
BomarFab
Santa Rosa, CA
Verified
I bought this because I needed an extra 1 1/2" inlet for a radiator project for my welder, and some material to raise the filler neck which the 1 3/4" tube worked perfect for. I was not able to use the NPT fitting provided, as I was trying to weld it there was a lot of contamination and it blew away while trying to get it to puddle, where the .090 tank body held up fine. I suspect it may have been anodized and I did not clean it well enough, so I ended up machining my own from 6061 bar stock.
Would Recommend
northern makes a great product
4.0
16 years ago
spartan motorsports
simi valley
not available in 1.75" for inlet and outlet.
Would Recommend
Showing 10 of 10 reviews
Questions & Answers
Questions & Answers
1 Question • 1 Answer
how long are they?
by charley
• 15 years ago
1 answer
View Answer
1 of 1 questions shown