Aluminum Fuel Line Installation Kit, -6AN Red/Blue Fittings

Easy-to-flare and bend tubing works great as AN hard line and will save weight and money. Use with the included AN fittings, rubber flex line, and line clamps for a quick and easy fuel line solution!

Kit Includes:

• (1) Speedway 3/8 OD Aluminum Hard Fuel Line/Tubing, 10 Foot Roll
• (1) 3ft, Black Push-On Hose, AN6 Fuel Line Gas/Diesel 300 PSI
• (2) Full Flow Swivel Hose End Fitting, Straight, Red/Blue, -6 AN
• (2) Russell 639210 3/8 Inch Tubing to -6 AN Male Flare Adapter
• (1) Earls 750006ERL Vapor Guard Screw Type 3/8 Hose Clamp 5/Pack
• (1) Insulated Line/Tubing Mount Clamps, 3/8 Inch, Bag of 10
• (1) Insulated Line/Tubing Mount Clamps, 5/8 Inch, Bag of 10

 

Speedway 3/8 OD Aluminum Hard Fuel Line/Tubing

• As featured on Classic Truck’s Week to Wicked. Watch the transformation here!
• Easy-to-flare and bend tubing works great as AN hard line
• Use with tube nut couplers, sleeves and 37° flared AN fittings
• Rated to 250 psi
• Not recommended for high pressure (brake) applications
• 10 ft. roll included

Learn more about flaring hard line and how to select proper automotive fittings by reading our tech article, The Principles of Automotive Fittings.

 

3ft, Black Push-On Hose, AN6 Fuel Line Gas/Diesel 300 PSI

• AN6 black push-on hose
• Ideal for fuel line applications only - NOT suited for oil or water use exceeding temperatures of 200° F.
• Working Temp:  -40 to +200 degrees F
• Max Pressure:  300 psi
• Compatible with gasoline & diesel fuels
• 3 foot length included
• When using at temp and pressure at the high end of the parameter, hose clamps should be utilized
• *Not ethanol compatible

 

Full Flow Swivel Hose End Fitting, Straight, Red/Blue, -6 AN

• Revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available
• These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings
• Manufactured from the highest quality aluminum and are then blue and red anodized to give them a new high performance look
• These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose
• -6 AN
• Straight
• Lightweight aluminum hose ends are completely reusable, and interchangeable
• 37° angled sealing surface guarantees a positive anti-leak seal
• Available in a Red/Blue corrosion resistant finish

 

Russell 639210 3/8 Inch Tubing to -6 AN Male Flare Adapter

• Tubing to AN flare adapters are for use with aluminum tubing only (not steel tubing)
• Connects 3/8" aluminum tube to -6 AN adapters
• Unique crimp design eliminates tube flaring
• Not for use with fuel injection

 

Earls 750006ERL Vapor Guard Screw Type 3/8 Hose Clamps

• Vapor Guard hose clamps provide easy assembly of hose to hose ends
• Stainless steel construction
• 3/8" diameter
• Screw Style
• Set of 5 included

 

Insulated Line/Tubing Mount Clamps

• Use these rubber coated fuel line tube clamps to finish your plumbing job
• Tube clamps are made from zinc plated steel
• Easy to work with, durable, and corrosion resistant
• 2 sizes included: 3/8" and 5/8"
• 10 clamps per package/20 total clamps included

 

Hose Fitting Sizing Chart (GIF)

Full Swivel Application Chart (GIF)