|
#9171001-1.25
$29.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 1.25" Outside Diameter, 90 degree Angle
| MFG. Part # | 9171001-1.25 |
| Brand | Speedway Motors |
| Angle | 90 degree |
| Material Type | Aluminum |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThese 90° bend aluminum tubes allow you to build custom radiator/coolant hoses. Each tube features a bead at each end to keep the hose from coming off under pressure. Can be cut to length.
Choose hose diameter needed.
Length measurement described in "Notes" is from the end of the tube to the center of the bend.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 9171001-1.25 |
| Brand | Speedway Motors |
| Angle | 90 degree |
| Material Type | Aluminum |
| GENERAL | |
| Outside Diameter | 1.25" |
| Finish | Natural |
| Sold in Quantity | Each |
| Notes | Tube is 7.50" on the "long" side and 4.50" on the "short" side. |
| Hose End Size | 1-1/4" |
5
67 Reviews
Customer reviews positively highlight the product's high quality, good price, and versatility. Its usage spans across various engine modifications, coolant line rerouting, and radiator hose fitting. Users praised the product's great fit and ability to be welded easily. The product is recommended as a useful solution for both custom and restoration projects. The product's material is consistently described as durable and capable of withstanding harsh conditions. Consumers were satisfied with the purchase, citing that the product performed as advertised and exceeded expectations.
5
67 reviews
5
64
4
3
3
0
2
0
1
0
Filter by Ratings
Takes a lot of polishing
5.0
a month ago
Schweder Andrew
St. Joseph MO
Verified
There exactly what I was looking for but it has taken me several hours of polishing to get them looking like I want for flathead. There was Avery bumpy pattern in the bend that took a while to polish out.
Would Recommend
Perfect 90 deg tube
5.0
a year ago
Andy S
Wisconsin
Verified
Great quality 90deg bend! Good material, fast delivery
Would Recommend
Excellent choice!
5.0
a year ago
Andy S
Wisconsin
Verified
Needed a tube with the rad cap port already on it for a custom application. Everything was really nice and worked out great!
Would Recommend
speedway motors T shirt
5.0
a year ago
mad scientist
Dallas, Tx
Verified
The tube was exactly as advertised. I had to shorten both ends but I knew I would have to do that before I ordered.
Would Recommend
i would buy again
5.0
a year ago
mack
ohio
Verified
used with radiator hoses was easier then buying many hoses to try
Would Recommend
Great quality
5.0
a year ago
Scott
NW Iowa
Verified
Used this to put a rear tank under the rear of an old Chevy pickup. That's made out of aluminum
Would Recommend
This worked pretty well
5.0
a year ago
Monteg0
Lincoln, NE
Verified
Had to make something work on an engine swap. This will do until I figure out a better route for my upper radiator hose.
Would Recommend
It solved my problem
5.0
2 years ago
Dicster
Iowa
Verified
Worked out for what I needed
I've bought this product several times.
4.0
2 years ago
Rick
Kansas
Verified
Automotive , No complaints on these
Would Recommend
Yes
5.0
3 years ago
Ron
Hulbert, OK
Verified
I used it to make a custom hose on an LS engine swap in a 56 Chevy. Worked greatn
Would Recommend
Showing 10 of 67 reviews
7 Questions • 7 Answers
How long is the pipe from the outside of the 90.
by Ken
• 2 years ago
1 answer
View Answer
What is the bend radius on the 1.25" pipe?
by Dustin
• 2 years ago
1 answer
View Answer
What is the I.D. of pipe and O.D. of pipe
by gar
• 8 years ago
1 answer
View Answer
On here it says that it can be cut to length. Does that mean you can cut it for me, or does it mean that I have to cut it when I get it?
by csmith
• 10 years ago
1 answer
View Answer
What is the radius of the bend ?
by Hood
• 11 years ago
1 answer
View Answer
what is the wall thickness?
by div5racer
• 11 years ago
1 answer
View Answer
how long is this tube from bend to end each direction?
by
• 15 years ago
1 answer
View Answer
7 of 7 questions shown
