Air Tool Organizing Kit

Wall Mount Air Hose Roll Storage Hanger, Metal Reel Holder

• Laser cut, press bent, and welded from .130-inch thick aluminum sheet stock
• Easily holds 50 ft air hose (or more) for convenient storage
• Storage pocket in base for air chuck, tire marking crayons, etc.
• Mounts via three pre-drilled 1/8-inch holes
• Attaches via tapping screws, bolts, or rivets (user provided)
• Mount to shop wall, trailer wall/cabinet, toolbox, or rolling cart

Never Trip Over Your Air Hose Again with Our Air Hose Storage Bracket

Just about every shop and even a lot of car trailers have an air compressor these days. The air compressor is the life blood of your air tools but is also used for everything from airing up your race tires to blowing the dirt off you and your race pit at the end of the night. Properly storing your compressor’s air hose prevents damage to your hose and creates a safer working environment where there is less chance of a trip and fall due to a spool of air hose chucked into a corner somewhere. This is especially important in the cramped working environment of a race trailer/pit situation. Thanks to our aluminum air hose holder you no longer need to find a place in your trailer for your air hose storage where it won’t be in the way or get damaged.

Our aluminum air hose holder is right at home in your trailer and matches other popular aluminum trailer accessories but can easily be used in your home shop or garage as well. It is crafted from .130-inch aluminum flat stock that is laser cut, press bent, and TIG welded into a strong assembly that easily supports the weight of a 50 ft air hose or longer air hose. The generous 8-inch by 5-inch hose storage section provides plenty of surface area to support at least 50 ft air hose storage and depending upon hanging height and air hose “loop” a 75 to 100 feet of hose can be comfortably stored. We provide three 1/8-inch mounting holes, and you provide the attaching fasteners specific to the mounting surface you are attaching the air hose holder to. Rivets are common for trailer wall mounting but tapping screws will work in many installations as well. Lastly, we have designed the air hose holder with a built in storage cubby the full length and width of the holder and almost 3-inches high for small items like an air chuck, tire marking pens, valve stem core tool, and more. However, we highly suggest our matching tire pressure gauge holder to protect your gauge versus trying to stuff a tire gauge into this cubby.

So, whether your existing race car trailer could use a little organization help, or you are looking to outfit your new race car trailer and start the season off with top notch storage solutions to keep your trailer clean and work ready, Speedway Motors’ line of trailer organizers, tie downs, winches, and more will help create that clean, functional trailer you have always wished for.

See our full line of trailer organizer products at Speedway Motors!

 

Aluminum Air Tool Holder Rack

• 18-inch long rack provides mounting slots for up to 17 air tools
• Additional holes and slots are provided to store small tools and accessories
• Built from laser cut and press bent .090-inch thick H32 aluminum
• 20-degree tool shelf angle ensures tools don’t fall out when bumped
• Tool slots are spaced two inches apart and upper and lower rows are staggered
• Mounts via three 1/4-inch holes and your choice of mounting fasteners

Store Your Air Tools Neatly in Your Garage or Trailer for Quick Access

Air tools make any job easier, that’s a given. We all remember the first time we used an air ratchet versus a hand ratchet and why we waited so long to invest in an air compressor and air tools. As your collection of air tools grows the problem becomes where to store the tools for easy access, especially if it is in a working shop where time is money. A drawer full of air tools means having to walk back to your tool box each time you need a tool. Not to mention digging through that drawer full of tools for the air tool you need and any accessory or adapter. A better solution is to have an air tool storage rack closer to your work area or air source and our aluminum air tool holder is the perfect solution.

Having your most used air tools nearby not only makes more efficient use of your time, but you can also quickly change from one tool to another without having to go back to your tool box multiple times. This is especially helpful for race car trailers. Mount your air tool hanger rack on your trailer door and quickly access the air tools you need for repairs instead of going inside the trailer to a tool box or cabinet drawer multiple times. Even for a home shop or garage, having this air tool rack near your work area (mount it to the side of your two- or four-post lift, next to your compressor, etc.) you can quickly load the air tool storage rack with the air tools you’ll be using for the task you’re about to handle, again saving you that time of running back and forth to your tool box that is at the back garage wall. It is the perfect addition to our growing line of aluminum trailer/shop organizer accessories.

Laser Cut Aluminum That Holds Up To 17 Air Tools and Accessories

Laser cut and press bent from .090-inch H32 aluminum, our air tool rack has the strength to support all the tools you own. Up to 17 tools in fact thanks to 2-inch tool spacing and staggered tool spacing between the upper and lower shelves. The 20 degree angled lip ensures tools stay in place and won’t fall off. The dual dimension slots support multiple air coupler fitting sizes so your tools will fit no matter if you’re using industrial or automotive type fittings, or even if they are high-flow style fittings. We have provided additional holes and slots in both shelves to store air tool wrenches, grinding/surface prep discs, air tool oil, and other tools. The air tool hanger rack can be attached to most any surface via the three pre-drilled 1/4-inch mounting holes. Installation hardware is not included due to the varied surfaces this can be attached to, but rivets, tapping screws, or through bolts with nuts are all possible depending upon the surface you are attaching the rack to.