Budget Air Ride Suspension Starter Kit

This kit will allow you to run 2 air bags independent of each other.  This is a great kit if you want or need to raise or lower just the front or the rearend of your ride and yet have a performance feel.

Kit contains 4 valves: 2 intake valves and 2 exhaust valves.  This kit has enough valves to run both the front and back of your ride, if you're looking to tie two bags together.

Tech Note:  Running two bags on one valve will cause your car to roll into a turn like an old Caddy instead of a modern day car.

Viair 450C air suspension single compressor kit is a continuous duty cycle compressor.  Features include a standard 1/4" NPT stainless braided leader hose with inline check valve and insulated wireing for simple instructions.

Seamless aluminum air tanks have revolutionized welded air tank construction. Specialty Suspension have adapted a new style of technology to create a non-welded tank. The metal spinning process has allowed Specialty to manufacture the tanks from a single piece of extruded aluminum tube. 

AVS GAU-200AVS2 Dual Needle Silver Air Gauge is one of the best on the market today. It features a silver gauge face with black lettering. Gauge sweep is full sweep and ranges from 0-200 psi!

AVS offers these great air intake valves with mounting brackets for your air suspension systems. They feature a pressure range of 250 PSI with a thread pitch of 3/8 inch NPT. Mounting brackets included.

The 3-Rocker Series Switch Controllers include cord with male and female connectors. This controller is for a 4-valve setup. The top switch controls front up/down, the bottom switch controls rear up/down, and the middle switch does all up/down.

Compressor Kit Includes:

• Check Valve
• Vibration Isolators
• Mounting Hardware
• Stainless Steel Braided Leader Hose
• Air Line for Remote Mount Air Filter
• Remote Mount Air Filter Assembly
• (2) Replacement Air Filter Elements
• Installation Instructions

Fill Rates:

• 2.5 Gallon Air Tank:
  • 0 to 105 PSI - 1 min. 55 sec. 
  • 85 to 105 PSI - 28 sec.
  • 0 to 145 PSI - 3 min. 2 sec.
  • 110 to 145 PSI - 59 sec.

Features

Viair 450C air suspension single compressor kit:

• 12 volt
• Permanent Magnetic Motor
• 100% duty cycle @ 100 psi
• 150 psi max working pressure
• Compatible with up to 5 gal tanks
• 23 AMP max AMP draw
• 10.6" length
• 4" width
• 6.87" height
• 10.80 lbs.

Seamless aluminum air tank:

• 18" Length
• 6.625" Diameter
• (4) 3/8" NPT ports (Two on each end cap)
• (1) 1/4" NPT port - (Drain port at bottom of tank)
• Rated @ 200psi
• Mounting brackets and hardware included
• Industry labeled size 3 gallon
• Actual volume 2.2 gallons
• Aluminum construction
• Natural finish

AVS GAU-200AVS2 Dual Needle Silver Air Gauge:

• Silver bezel finish
• Full sweep gauge
• Gauge range 0-200 psi
• Black letter color 
• 1/8" NPT male threads

AVS air intake valves:

• 3/8" NPT threaded ports
• 15mm orifice
• Suitable for air/water/oil
• 12 VDC explosion-proof coil
• Flow rate: Cv = 4.50
• Working temperature: 23° - 176° F
• Included LED indicator on solenoid for trouble shooting and diagnostics
• Mounting brackets included

Viair 90102 1/8 Inch NPT Air Supsension Pressure Switch, 150 PSI:

• 1/8 inch male por
• 20 amperage rating
• Black color
• Steel construction
• 110 psi circuit closes
• 145 psi circuit opens

3-Rocker Series Switch Controllers:

• Black in color
• Easy to install
• Allows you to control air suspension levels
• 4" length
• 2" width
• 1" height 

45040 Manual (PDF)

45040 Dimensions (PDF)

45040 Wiring Diagram (PDF)