Menu

Shop

Garage

Cart

Account

Product Summary

68-72 Chevy Chevelle, Modified, Sport Mod, Steel

  • Approved by IMCA, WISSOTA, USRA, USMTS, DIRTcar, and most other major sanctioning bodies
  • Perfect platform for new builds or repairs of Modifed or Sport Mod chassis
  • Material is the same grade and thickness as the OEM frame and welds very consistent
  • Chevelle front stub assembly is both easy and consistent due to the locating tabs having built-in stops for alignment
  • Cross member has clearance built in the back side for radiator placement and in the front side for steering components

Key Specs

MFG. Part #40000
BrandAFCO
PositionFront
Material TypeSteel
FinishNatural

Need To Know

This Product Will Ship Free

Quick and Easy Returns

Details

The AFCO 40000 Dirt Modified replacement Chevelle frame kit is engineered for dirt track racing and follows OEM specifications. The kit design allows circle track chassis builders to reduce their build time by over 50%. In testing, AFCO found that it takes significantly less time to build this frame kit than utilizing an OEM chassis.

  • Approved by IMCA, WISSOTA, USRA, USMTS, DIRTcar, and most other major sanctioning bodies
  • Perfect platform for new builds or repairs of Modifed or Sport Mod chassis
  • Material is the same grade and thickness as the OEM frame and welds very consistent
  • Chevelle front stub assembly is both easy and consistent due to the locating tabs having built-in stops for alignment
  • Cross member has clearance built in the back side for radiator placement and in the front side for steering components
  • Cross member has been lowered on the left upper side for steering shaft clearance
  • Crossmember has 5/16" locating holes on the lower section for correct indexing of horn placement for easy fitment
  • Front horns have been notched in the spring pocket area for ease of spring changes
  • Allows the stamping to be stronger in the spring pocket area, as the metal is not pulled in different areas as the factory frames are
  • The horns and the rear lower control arm mounts have two 5/16" locating holes to locate the correct rear control arm placement
  • GM replacement frame rails have locating tabs for easy placement to frame horns
  • The weight of the AFCO frame is the same as the factory OEM frame with the same cuts
  • Replacement individual right and left horns and right frame rails are available for crash repair
  • Saves up to 6 hours of build time
  • Locating tabs for easy assembly
  • Excellent drag link and radiator clearance
  • Factory steering bolts directly on to this Chevelle front clip
  • Pre-cut spring pockets

Note: Not for street use. This frame is for Dirt Modified or Sport Modified racing use only. No provisions for factory GM A-body springs, front bumper mounts, etc.

Charts

Specifications

KEY SPECS
MFG. Part #40000
BrandAFCO
PositionFront
Material TypeSteel
FinishNatural
GENERAL
Sold in QuantityKit