This is Garage Sale priced due to Speedway Motors will no longer be stocking this product. Item is new and in unused condition. THESE HAVE A GLOSSY FINISH, THEY ARE NOT MATTE.
NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS
- Machined from 6061-T6511 billet aluminum for strength
- Direct replacement for stock plastic door handles, often brittle and break easily
- Available in raw aluminum for polishing/painting or durable black Cerakote finish
- Sold in pairs for front or rear doors (both use the same main pull handle)
- Complete kits available that include handles pre-installed in new plastic housings
- Replacement handle includes machine screw/nut to replace pivot pin if needed
- Complete kit housings do not include mounting hardware (reuse or source M6-1.0 nuts locally)
- Fits 1999-2006 GMT800 trucks and 2007 GMT800 “Classic” models only
Replace Your Broken Silverado or Sierra Pickup’s Door Handles and Add Some Style to Your Truck
Sometime in the early 90s many automakers switched from metal exterior door handles to plastic handles. While some of this may have been a styling exercise (body colored handles became popular), or to minimize exterior chrome trim at the time, no doubt the switch also was the result of a cost saving measure by using injection molded plastics that needed little to no finishing by the manufacturer. Unlike a metal handle that required sanding and buffing, and then plating to provide a finished product, the plastic parts are nearly installation ready right out of the mold. However, the plastic handles soon showed their weakness in cracks and failures in high stress locations such as pivot points, hinges, and the like, especially in extreme heat or cold environments. Plastic Chevy door handle replacements from the dealer or aftermarket eventually do the same thing. So, if you’re looking for a Chevy Silverado door handle replacement to repair your broken door handles on your ’99-’06 GMT800 pickup once and never worry about them again, you need the strength of a metal handle like our billet aluminum Chevy Silverado door handles.
Manufactured from billet aluminum blanks of 6061-T6511 aluminum, our Chevy Silverado Door handle replacement is styled to blend in and perfectly fit your truck’s factory handle housings. Or you can order our complete kits with new plastic housings that have our billet handles already installed for you, saving installation time and the headache of having to deal with broken housing studs (a common issue with age and moisture intrusion causing the studs to rust and break off when attempting to loosen them). Either way, installing our billet exterior Chevy door handle sets on your Chevy Silverado or GMC Sierra will make this repair a “one and done” exercise for you and you’ll never have to worry about your Chevy Silverado door handles breaking off in the heat of summer or the bitter cold of winter.
Available in Raw or Black Cerakote Finish and With or Without Replacement Housings
Knowing that some prefer a stock appearance, we opted to offer our new Chevy Silverado/GMC Sierra door handle replacement in a durable black Cerakote finish ready for installation in your housing (or available with new reproduction plastic housings ready to bolt in). For those looking to do something custom, be it a polished aluminum look, body color paint, or other finish like powder coating, we also offer these Chevy Silverado door handle replacement handles in a raw aluminum finish. Either way, you’re getting new outside door handles reinforced in all critical areas that work with all factory mounting points, and actuator rods. Besides finish options you can choose from just replacement handles that reuse your housings, front or rear door kits assembled with new reproduction housings, or a complete four door set of front and rear handles pre-installed in reproduction housings ready for installation.
The outside Chevy door handle sets include new retaining pin hardware (machine screws with nuts) if your original retaining pins are damaged, worn, bent, etc. If you opt for just our door handles you will need to remove your handle housings for installation and the pivot spring does require some dexterity/effort to place properly, but certainly doable by the average enthusiast. Note that the complete kits with new housings do not include installation hardware, as your original retaining nuts should be reused. If your factory hardware is damaged beyond reuse, or rusted to the mounting stud, breaking off during removal, you will need three M6-1.0 metric nuts per handle housing to install them. We highly recommend our kit versions due to the high frequency of housing stud failure, plus if you’re looking to paint your outside handles you’ll want new housings anyway.
These handles fit all models of 1999 to 2006 Chevy Silverado and GMC Sierra pickups based on the GMT800 platform. They will also work for the 2007 model year Chevy Silverado Classic and GMC Sierra Classic models as well. Proudly manufactured in our state of the art machine shop in Lincoln, NE for your American made pickup truck! Add some style, strength, and durability to your GMT800-based Silverado or Sierra and never worry about breaking an outside door handle again!
