|
#6172062
$10.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Universal Fit, -4 AN Male Fitting End A, Zinc Plated
| MFG. Part # | 6172062 |
| Fitting End A | -4 AN Male |
| Fitting End B | 7/16"-20 Male |
| Angle | 90 degree |
| Material Type | Steel |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyIf you have a master cylinder, caliper or brake valve that has the common 7/16"-20 IFF inlet or outlet, this fitting will allow you full adjustment in a limited space.
Simply thread fitting in and tighten jam nut and you are good to go. Accepts AN4 hoses or lines.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 6172062 |
| Brand | Speedway Motors |
| Fitting End A | -4 AN Male |
| Fitting End B | 7/16"-20 Male |
| Angle | 90 degree |
| Material Type | Steel |
| GENERAL | |
| Fitting Style | Adapter |
| Fitting Category | AN to NPT |
| Finish | Zinc Plated |
| Color | Zinc |
| Sold in Quantity | Each |
| O-Rings Included | Yes |
| Swivel | No |
| Gauge Port | No |
| AN Size | -4 AN |
| Thread Pitch | 7/16" - 20 |
| Thread Pitch (2) | 7/16" - 20 |
5
5 Reviews
Customers appreciate the product's quality and practicality, finding it useful in adjusting brake hoses and GM calipers. Users commented positively on the fitting, specifically its compatibility with braided lines. Its ability to adjust and facilitate customization was well-received. Despite concerns about shipping, the product's functionality stood out, making it a recommended choice over competitors for specific modifications.
5
5 reviews
5
5
4
0
3
0
2
0
1
0
Filter by Ratings
Worked perfectly
5.0
9 months ago
Jimbob
Austin, TX
Verified
Used on my Wilwood master cylinders to convert to a -3 barb fitting for the inlet hose.
Would Recommend
Worked in remote reservoir
5.0
a year ago
Marty_in_Mesa
Mesa, AZ
Verified
I used it on a remote brake reservoir. Fit and worked perfectly
Would Recommend
Ok
5.0
3 years ago
Old engineer
Columbus Texas
Verified
Nice piece but shipping is outrageous
Would Recommend
Used for GM calipers
5.0
4 years ago
Jeremy
Henderson North Carolina
Verified
While mocking up speedways disc brake conversion for my 41 ford pickup I ran into a snag with the brake hoses as they would only exit frontward using the banjo fittings. used these fittings to allow my braided lines to exit rearward on the GM calipers.
Would Recommend
Great brake fitting, allows for adjustment.
5.0
5 years ago
Scott
Arizona
Verified
Great brake fitting, allows for adjustment.
Would Recommend
Showing 5 of 5 reviews
3 Questions • 5 Answers
Hey there, what is the measurement of the height of this please from the bottom of the nut when its screwed all the way up to the top of the thing please? thankyou
by Big Ben
• 10 years ago
1 answer
View Answer
Need adapter for 90 deg. connect from brake master cylinder to flared line Recently bought a remanuf. brake master cylinder but connection point for brake line is not same as orig. equip. Orig. connection was on bottom of master cyl., but remanuf one is located on end or side of cyl. housing So I have a 7/16 -20 female thread on end of remanuf. master cylinder (horizontal) and the orig. 1/4 in. flared brake line tubing with nut coming up beneath it vertically. Need to connect the two. I don't know the threads of the nut on flared tubing but looks like 5/16. Will this adapter work?
by 57dude
• 13 years ago
2 answers
View Answers
will this work on gm metric caliper fluid inlet? i have the gm metric calipers with 7/16x20 banjo bolt. will this fitting work on the caliper and allow me to replace the banjo bolt?
by rscott
• 13 years ago
2 answers
View Answers
3 of 3 questions shown
