|
#91034902
$66.99
/pair
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
7.00" Centerline of Holes, .25" Material Thickness
Need help?
855.313.9176Quick and Easy Returns
Return PolicyFront disc brakes provide a significant improvement in braking performance versus the drum brakes your car came with. This bracket pair fits 1964-72 GM A-Body, 1967-69 GM F-Body and 1968-74 X-Body using your stock disc brake spindles or our new replacement stock height disc brake spindles # 910-34900.
Brackets are for an application using 11" diameter vented brake rotor with 5 on 4-3/4" wheel bolt pattern, and '69-'77 GM style calipers (7/16"-20 inlets), to help complete installation onto factory disc brake spindles.
Note: brake brackets will not fit our 2" dropped spindles # 910-34906 or stock drum brake spindles. Must be used with stock style disc brake spindles and 15" diameter or larger wheels.
Charts
910-31958 Instructions (PDF)
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91034902 |
| Brand | Speedway Motors |
| Material Type | Steel |
| Finish | Zinc Plated |
| GENERAL | |
| Centerline of Holes | 7.00" |
| Material Thickness | .25" |
| Sold in Quantity | Pair |
5
6 Reviews
Customers consistently praised the product's perfect fit, a testament to its quality and practicality. The material quality ensures the product maintains excellent usability. The product's features were consistently recommended over competitors, highlighting its superior aspects.
5
6 reviews
5
6
4
0
3
0
2
0
1
0
Filter by Ratings
fits
5.0
a year ago
skippy
san mateo
Verified
Fits perfectly
Would Recommend
The right fit for G-Comp dropped spindles and stock GM brake
5.0
a year ago
Brian Jones
Salt Lake City
Verified
Had an issue with the stock brackets not aligning correctly after changing the stock GM spindle out for the 2" dropped G-Comp spindle. These new brackets fit perfectly the first time.
Would Recommend
Fit great just a little trimming on back side bolt holes
5.0
a year ago
Jeremy
Montana
Verified
Finally found the correct caliper brackets trying to take my 67 El Camino back to the stock front end parts. Previous owner of the vehicle swapped in an entire steering linkage setup and all the front brake parts off of an 80s G body El Camino that was all metric. These caliper brackets are quality pieces. Just need to trim a little bit off the backside of the bolt hole areas so the rotor turns a little easier and doesn't bind up on the caliper itself. My rotors are just stock replacements from Napa with a 1/2 inch stud upgrade.
Would Recommend
Nice product
5.0
2 years ago
Bill
Ardmore
I used these brake brackets to replace my bent factory brackets. The new brackets from speedway were very nice and was easy to install with no problems at all.
Would Recommend
Fit perfectly
5.0
3 years ago
Joel
97385
Verified
Fit perfectly
Would Recommend
Good product
5.0
7 years ago
Ernie
Washington Indiana
Verified
Good fit
Would Recommend
Showing 6 of 6 reviews
1 Question • 1 Answer
need brackets for my 72 nova
by Bob
• 6 years ago
1 answer
View Answer
1 of 1 questions shown
