44" Gasser Strt Axle Chevy Spindle Brake Kit W/ Wilwood Calipers

These kits include our gasser straight front axle, semi-elliptical springs, spindles, king pins, steering arms, tierod kit, brake kit, and hardware. Choose either 5 on 4-1/2" or 5 on 4-3/4" bolt pattern with standard brake kit or Wilwood brake kit. Standard brake kits use new rotors and Wilwood D154 calipers. Wilwood brake kit includes dual-drilled hub. Brake lines not included. Shocks not included, but shock mounts are included. Assembly required.

• 44 Inch

Note: Wilwood brakes increase hub-to-hub width by 1".

Item Details

49-54 Chevy Spindles w/ o/e style rotors/calipers, Specify bolt pattern,
44" Wide axle - 52 1/2" hub to hub.

46" Wide axle - 54 1/2" hub to hub.

48" Wide axle - 56 1/2" hub to hub.

50" Wide axle - 58 1/2" hub to hub.

Wilwood brake kit adds 1" to hub to hub widths above.

• Not For Off-Road Race Use

1. If using steel wheels with Wilwood kit, you will also need to purchase (2) steel shims part 835-3007500. These shims will prevent steel wheels from galling the aluminum hub.
2. Rubber brake hoses generally cannot be adapted to Wilwood calipers. The caliper inlet fitting is a 1/8-27 NPT. The preferred method is to use steel adapter fittings at the caliper, either straight, 45 or 90 degree and enough steel braided line to allow for full suspension travel and turning radius, lock to lock.

Gasser Kit w/ "Chevy" Spindles

• Leaf springs, 31-1/4" long x 1-3/4" wide
  • 6 leaf, 1/4" thick
  • 400 lbs/inch spring rate
• Chevy-style spindles (forged steel)
  • Modeled after the 1949-54 Chevy passenger car spindle

"Chevy" Spindle Standard Brake Kit

• 5 x 4-1/2" Ford/Mopar bolt pattern
  
  • 9-1/4" vented iron rotor, .890" thick
  • Hub flange (hat) diameter - 5.74"
  • 1/2" Fine wheel studs
  • Wilwood D154 calipers
  • 7/16"-20 banjo bolt to AN-3 line adapter kit
• 5 x 4-3/4" GM bolt pattern
  • 9-1/4" vented iron rotor, .890" thick
  • Hub flange (hat) diameter - 5.74"
  • 7/16" Fine wheel studs
  • Wilwood D154 calipers
  • 7/16"-20 banjo bolt to AN-3 line adapter kit

"Chevy" Spindle Wilwood Brake Kit (must use 15"+ wheels)

• Forged Dynalite 4-piston Calipers
• 10.75" x .810" Ultralite HP 30 Vane iron rotors
• Wilwood Polymatrix-D Pads - very high cold friction, high fade/glaze resistance to periodic heat
• Lightweight anodized aluminum Pro Street hubs
• 1/2"-20 wheel studs