|
#91084116
$1,028.99
/set
In Stock
Quantity
Need Help? Call to Order
Add to a list
Comes as a Kit
View Kit Components
Need help?
855.313.9176Quick and Easy Returns
Return PolicyYou’re ready to get to work on your roll cage, frame crossmember, bumper, or other chassis component—and we’re ready to help you with our 3rd Generation Hydraulic Round Tubing Bender. It bends round chromoly tubing or mild steel tubing up to 90 degrees.
An eight-ton hydraulic jack housed inside a sturdy frame handles bending tube like a professional, yet the entire assembly weighs under 50 lbs.
The 3rd Generation Hydraulic Bender comes with five replaceable aluminum dies for round tubing with outer diameters (OD) of 1-inch, 1.25-inch, 1.5-inch, 1.625-inch, and 1.75-inch diameter tubing to handle any of your tube bending needs.
It has 7-inch bend radius dies for all five tubing sizes and incremental marks cast into dies that make it easy to reproduce bends. You can use it with up to .110-inch wall thickness mild steel or .096-inch wall thickness chromoly round tubing. Our 3rd Generation Hydraulic Round Tubing Bender is an affordable way for anyone to invest in their own tube bender at a fraction of the cost of what you'd pay for one at a shop.
| KEY SPECS | |
|---|---|
| MFG. Part # | 91084116 |
| Brand | Speedway Motors |
| GENERAL | |
| Sold in Quantity | Kit |
4.1
15 Reviews
Customers appreciate this hydraulic jack based bender for its reliable performance. It’s praised for proficiency in bending thin tubing, being handy for crafting bumpers for sports and stock cars. It's held in high regard for ease of use, portability, producing reliable bends and ease of setup. Exceptionally useful for personal projects, the product’s vertical bends require minimum workspace. However, some customers pointed out its limitation for heavy-duty work, and challenges with creating smooth, ripple-free bends. Some customers experienced accessibility issues with the safety cable. Potential users looking for light to moderate use seem satisfied.
4.1
15 reviews
5
6
4
6
3
1
2
2
1
0
Most Liked Positive Review
4.0
Works Great!
After reading the reviews I decided to buy this today. I love it so far but can relate to- "There is also a safety issue with the safety cable that runs thru the spring. One 90 degree bend with the 1.75 die and the cable comes apart." The cable is simply not long enough with where the lower bolt is located and pulls apart before the 90 degree. Simply relocating the lower bolt to a lower position should fix the problem. From seeing the design from the 1st generation bender, this one is MUCH improved. One other suggestion would be to have bigger print for the instruction manual. My reading vision is very good but I could hardly read the manual because of the small print and lack of ink that was on printed on the paper.
Most Liked Negative Review
2.0
FIX IT MYSELF!!!? REALLY!!!!?
The product was easy to use once I figured out all the measurments and where I needed to make the bends. There is no booklet explaining any of this for what you need to do for chassis demensions and what the bender takes up or what the dies use up when bending tubing. There are a couple of things that the speedway staff came up with that "The customer might want to do to make it easier to use". There is also a safety issue with the safety cable that runs thru the spring. One 90 degree bend with the 1.75 die and the cable comes apart. Don't contact customer service. Customer service knows there is an issue with this and, they will just tell you to fix this yourself.
Filter by Ratings
Works has promised
5.0
6 months ago
Super
Billings mt
Verified
Works as said building superstock bumpers
Would Recommend
No regrets
5.0
2 years ago
Trike
Jericho, VT
Verified
I thought bending with the hydraulic jack might be a bit of a pain but it works great. The instruction do mention it might be helpful to attach the jack to the base plate with a bolt I would not try bending without doing that. Without the bolt the jack does not stay in place. I am very happy with this purchase.
Would Recommend
Good for bumpers and uncomplicated bends. But that's all.
2.0
4 years ago
Dale
Alabama
I bought this bender to build cages. The dies are made of cast aluminum and after 2 bends, the die exploded. When trying to bend 90° the hydraulic jack angle is pushing at the wrong angle and the die will not hold. As long as you are bending thin tubing for bumpers, it's fine. I use 1 3/4" × .095" wall DOM tubing and the bender is NOT strong enough to last. When my die exploded, I immediately called Speedway and didn't get much help. I paid for a new die and after waiting over 6 months, I finally canceled the order and instead went and bought a much better bender. I thought I done enough research before I bought this product but apparently not. Basically, remember you get what you pay for. Don't expect much out of this product, sorry.
Would Not Recommend
i would buy this product again
4.0
6 years ago
Sporttd10
wisconsin
Verified
works great for building bumpers for sportmods and stockcars
Would Recommend
I wished I had jumped on this product sooner
5.0
6 years ago
scooba dude
Mass.
Verified
Bends tubing with ease, still trying to eliminate inner wrinkles in pipe. Haven't had a chance to try speedways suggestion of thin oiled newspaper on anvils to ease this problem
Would Recommend
WORKS AS IT SHOULD
5.0
7 years ago
NISNO22
CENTRAL WISCONSIN
Verified
MAKING ROLE CAGES FOR MODIFIED FOUR CYLINDER OVAL TRACK RACE CARS
Would Recommend
Works great, very portable and easy to use!
5.0
9 years ago
RT
Sheridan Oregon
Verified
Very easy to set up ,makes nice smooth bends consistently, very easily portable!
Would Recommend
Excellent bang for the buck
4.0
10 years ago
64 Fairlane
Austin TX
Verified
I build several projects a year and finally pulled the trigger on this bender. It has been very easy to use. The hydraulic jack keeps the effort low and the vertical bends keep the work space to a minimum. We are happy with the quality of the bends.
Would Recommend
This bender works very well.
4.0
12 years ago
L750
Undisclosed
I've been using this bender for six months now and it has performed very well. For the cost and performance the bender has worked out very well.
Would Recommend
worked great
5.0
12 years ago
race30
Springfield, OR, USA
Verified
This worked perfect,I found out bending tubing is an art form,
Would Recommend
Showing 10 of 15 reviews
2 Questions • 3 Answers
what is the largest diammiter, thickest wall it will bend
by Dan
• 10 years ago
1 answer
View Answer
whats the thinest you can bend
by buzz
• 15 years ago
2 answers
View Answers
2 of 2 questions shown
