|
#91089524
37 Degree Flaring Tool for Stainless Steel Line
- This is the best 37 degree flaring tool for the money we have found
- Hardened flaring cone supported by needle bearings to provide the most accurate flare possible
- Works with tubing sizes of 3/16", 1/4", 3/8", 1/2", 5/8" and 3/4" outside diameter
$199.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Product Summary
Stainless Steel, 37 degree Degree of Taper
- This is the best 37 degree flaring tool for the money we have found
- Hardened flaring cone supported by needle bearings to provide the most accurate flare possible
- Works with tubing sizes of 3/16", 1/4", 3/8", 1/2", 5/8" and 3/4" outside diameter
- Compatible with steel, stainless steel, copper, brass and aluminum tubing with .035" wall thickness
- Creates profesional leak free flares with minimal effort
Key Specs
| MFG. Part # | 91089524 |
| Brand | Speedway Motors |
| Material Type | Stainless Steel |
| Degree of Taper | 37 degree |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91089524 Details
Speedway Motors 91089524 Details
This is the best flaring tool for the money we have found. It has a feed screw with a hardened flaring cone eccentrically mounted in needle bearings which produces a rolling action for even metal flow. This provides uniform wall thickness without galling. It will put a 37 degree flare in 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8” and 3/4” tubing. We recommend this tool when flaring 3/16” stainless steel brake line.
- Provides smooth, uniform flares with minimum effort
- Feed screw handle requires less motion and effort than standard handle
- Flares steel, stainless steel, hard copper and brass thru wall thickness of .035"
Learn more about flaring lines for our automotive fittings by reading our Toolbox tech article.
You can also learn about 37 vs 45 degree flaring and other brake line fittings in our Toolbox article on automotive fittings.
Item Details
We recommend this tool when flaring 3/16" stainless steel line.
Charts
Instructions (PDF)
Guides & Documents
Speedway Motors 91089524 Specifications
Speedway Motors 91089524 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91089524 |
| Brand | Speedway Motors |
| Material Type | Stainless Steel |
| Degree of Taper | 37 degree |
| GENERAL | |
| Sold in Quantity | Each |
| Notes | RIDGID |
Ratings & Reviews
4.8
64 Reviews
The reviews highlight that the tool delivers high-quality, perfect 37 degree flares consistently, particularly on stainless steel tubing. Customers commented on its robustness, ease of use, and stated that it performed better than more expensive options. It's also noted that it can be used in situ on vehicles - an advantage over other models which require a workbench setup. Some customers wished it could be disassembled for cleaning and that it came in a hard case, but overall, the tool received strong recommendations for anyone dealing with stainless steel tubing.
Ratings & Reviews
4.8
64 Reviews
The reviews highlight that the tool delivers high-quality, perfect 37 degree flares consistently, particularly on stainless steel tubing. Customers commented on its robustness, ease of use, and stated that it performed better than more expensive options. It's also noted that it can be used in situ on vehicles - an advantage over other models which require a workbench setup. Some customers wished it could be disassembled for cleaning and that it came in a hard case, but overall, the tool received strong recommendations for anyone dealing with stainless steel tubing.
4.8
64 reviews
5
55
4
6
3
2
2
0
1
1
Most Liked Positive Review
5.0
nice
Unit is heavy, which is good, all connections are nice and tight. I have flared some 3/8 brake line and it did a very nice job. Have not tried stainless yet but I am confident. Nice product, I am sure it is the last one I will need to buy.
Most Liked Negative Review
1.0
Does not work well with Stainless steel
I bought this tool in March to flare stainless steel brake lines on my hot rod project. The first tool was able to make a half dozen flares before the anvil couldn't be kept tight enough to get a consistent flare. I asked Speedway for a replacement which they happily provided. After flaring 2 more lines and re-flaring a couple lines that were not completely flared, the same problem is occurring. I recommend looking for other choices if you are flaring stainless steel lines. This tool would probably work fine on mild steel but that is just a guess as I didn't use it in this manner.
Filter by Ratings
I would highly recommend this flaring tool it's by far the
5.0
a month ago
Woody
Sandusky Ohio
The tool is for a car that we are working on at the shop and it was delivered to my house I had some tubing at home and made some flares with it and it was a precision tool It was easy to use and made several perfect 37 degree flares In my opinion it's more money than the rest of the ones I've been looking at and far superior than the ones I've been using so I think it's well worth the money spent
Would Recommend
Looking for a flare tool that can do stainless steel?
5.0
a year ago
MoparGuy
Modesto, Ca
Verified
Look no further! This flare tool is heavy and has no problem flaring those stainless steel fuel and break lines for your project. Great range of size compatibility for different applications. I used this on some SS 3/8" fuel lines and it worked well.
Would Recommend
I would recommend this product.
5.0
a year ago
DP
Floresville, Tx.
Verified
This tool works great and does a great job as advertised.
Would Recommend
I recommend this tool
5.0
2 years ago
Majestics
San Diego
Verified
This tool is worth every dollar, easy to use and a great 37 degree flair on my stainless steel tubing… no leaks!!! Perfect
Would Recommend
I would buy this tool again.
5.0
3 years ago
none
Kentucky
Verified
Used this to flare steel lines at 37 degrees, for AN fittings. The "off center" cone made quick work of burnishing / working the lines for a perfect flare. I have notice that some users have commented about the cone anvil being out of round or mis machined. This is by design and is made to work the tubing into the flare.
Would Recommend
Excellent Tool
5.0
4 years ago
Jon
Detroit
Verified
Best flare too I have ever used. Perfect flares every time.
Would Recommend
Does the job well. First time using flare tool, easy to use
5.0
4 years ago
Bryan
West Hartford, CT
Verified
Using this product to flare fuel lines for a AN line conversion
Would Recommend
Well make tool
5.0
4 years ago
Taco
Toledo
Verified
Made perfect flare first time using it
Yes definitely would buy again
5.0
4 years ago
Jumpster
Tehachapi California
Verified
Works as I would expect it to
Would Recommend
Good product
4.0
5 years ago
Danlite
Co
Verified
Works great on steel line.
Would Recommend
Showing 10 of 64 reviews