3/16 Inch PVF Coated Steel Brake Line Kit w/Black -3AN Fittings

Speedway makes plumbing brake lines easy with this steel brake line kit that includes new lines and fittings to make your job less stressful.

Kit Includes:

• (1) 25 Ft. Roll of Speedway 3/16 Inch PVF Coated Steel Brake Line
• (1) Pack of 6 Speedway 481803-BL Aluminum Tube Nut Coupler, -3 AN, 3/16 Inch
• (1) Pack of 6 Aluminum Tube Nut Sleeves, -3 AN, Black, 3/16 Inch

Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.

 

Speedway 3/16 Inch PVF Coated Steel Brake Line

Now available for your 3/16" brake line consideration is a new PVF Poly-Armour Poly-Vinyl Fluorine coated brake line. 

• PVF coating is a highly durable 'plastic' coating that is 'baked and cured' to the line for a durable finish that provides a clean look and appearance with a dark olive green color
• This provides extra protection from corrosion, debris, and road surfacing solutions
• Also offers superior bend-ability without kinking and bends easier than standard brake line tubing
• This makes Poly-Armour the easiest line to work with-period!
• Underneath the PVF coating is a double-wall, low carbon steel, copper brazed tubing which meets all international and U.S. requirements for brake tubing
• Considered a premium line, Poly-Armour hard line should be used on any vehicle that will see any type of harsh environment including snow, road treatments, salt, air, dirt/gravel etc.
• PVF Poly-Armour coated line is the perfect choice for the racer for those weekend after race chassis washes week after week or any street rod fabricator wanting to utilize a hard line application for that beautiful finish that will last for years
• Available in a 25' roll of 3/16" line
• This line bends easily and smoothly with hand tools and can be flared with a 37° AN flaring tool, or 45° double flaring tool
• Use in conjunction with our 3/8"-24 inverted flare male brake line nuts, or AN tube nuts and sleeves

 

Speedway 481803-BL Aluminum Tube Nut Coupler, -3 AN, 3/16 Inch

• Use these tube nut couplers in conjunction with our tube sleeves to seal bulkhead fittings to fuel cells, oil tanks and other applications using hard line fitting situations
• You need to flare the tube to 37° to match the AN fittings
• Not for use with 45° flared lines

 

Aluminum Tube Nut Sleeves, -3 AN, Black, 3/16 Inch

• When used in conjunction with our tube nuts, allow you to attach hard lines to AN fittings
• You need to flare the tube to 37° to match the AN fitting
• Not for use with 45° flared lines

 

Brake System Builder Tip (GIF)

Fitting Thread Application Chart (GIF)