Control Arm
This upper control arm for 1970-1981 Camaro is designed to be used with the stock mount. Available in 8", 8-1/4", 8-1/2", 8-3/4", 9", 9-1/4", 9-1/2". This control arm requires the use of a K6024-style ball joint, which is equivalent a 1963-’71 Chevy pickup style upper ball joint. It will have a 7 degree tapered stud and therefore, the stock Camaro spindle must be reamed to fit the pickup ball joint.
Cross shaft mount bolts center on center. Measures 7-3/4". The arms are symmetrical.
Note: This control arm does not use a stock Camaro ball joint, (all) of the ball joints that we offer require reaming stock spindle.
Note: Our "length" reference refers to the distance from the center of the ball joint to the centerline of the cross shaft. The "stock" length of a Camaro upper A-arm is 9-1/4".
Ball Joint
This ball joint uses the Ford taper found on Mustang II/Pinto spindles. Common on IMCA Modifieds - very durable and economical replacement item. Will not fit stock GM upper A-frame.
This ball joint will NOT fit the stock taper in a 1963-71 GM truck spindle. To use this with GM-type spindles the upper taper must be reamed with reamer 910-89411.
Same as Moog K6024.
